Boy Reindeer Hug Gift Card Holder

Boy Reindeer Hug Gift Card Holder-JMR

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

1.Cut design pieces. I used double sided card stock.

2. Fold the card along score lines. Glue the nose (with a tiny circle hole) to the solid circle nose base. Glue the reindeer head (with cutouts ) to the reindeer head with antlers. Glue the oval mouth (with smile cutout) to the solid oval mouth base. Glue the combined jingle bell to the solid jingle bell base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Insert gift card. Glue the combined reindeer head to the card base;aligning at the top and edges and centering it.

5. Glue the eyes and ears into the coordinating shapes on the combined card base. Glue the collar piece under the combined head piece on the card base.

6.Glue the eyeballs on to the eyes. Glue the combined jingle bell to the collar piece.

7. Flip the card over and glue the hooves to the coordinating shapes on the arms of the card base.

8. Glue the combined mouth piece into place.

9. Use a foam adhesive square to attach the combined nose to the combined mouth piece.

10. This is what it should look like:) Tuck the hooves into their slots. I used ribbon to trim the card:).

Christmas Hug Gift Card Holders that you may also be interested in:)

Blue Snow Bird Hug Gift Card Holder

Blue Snow Bird Hug Gift Card Holder-JMR

Approximate Card size: 4” x 5.75” 

This card features character arms that open to release a hidden gift card section. The bird has a tail on the backside:) This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.( I changed the color of the combined scarf, earmuffs, and the tail piece from the beginning of this tutorial) There are two wing pieces included in your file that are not shown at the beginning of this tutorial.

2. Fold the card along score lines. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the scarf base to the bird head/chest piece.

3. Glue the bird head/chest piece to the coordinating shape on the card base; center and align at the top and edges.

4. Glue the earmuff base and eyes in place.

5. Glue the small black eyeballs into place. I used adhesive dots to accentuate the eyes onto of the black eyeballs. Using foam adhesive squares, attach the earmuffs, beak, feet, and scarf square into place. Insert the gift card. 

6. Flip the card over. Using an adhesive foam square, attach the tail piece. Glue the two wings to their coordinating shapes on the card base. Tuck the wings into their slots. I used ribbon to trim the card:).

Hunter Santa Hug Gift Card Holder

Hunter Santa Hug Gift Card Holder-JMR

Approximate Card size: 4” x 5.25” 

This card features character arms that open to release a hidden gift card section. The Hunter has a hunting vest detail on the inside:) This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.

2. Fold the card along score lines. Glue the stocks of the gun onto the gun base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Glue the Vest pieces into place. Glue the nose on the mustache piece.

5. Glue the oval Beard base into place; centering it with the card base and matching up with the top of the card base. Glue the pocket trim and button onto the pocket base. Glue the Hat and Gloves trim pieces onto their coordinating base pieces.

6.Glue the combined hat and combined pocket piece into place.

7. Glue the face piece into place. Using an adhesive foam square, attach the nose/mustache piece. 

8. Glue the eyes on to the face and black hat shadow piece to the combined hat.

9. Flip the card over. Glue the rectangle piece and combined mittens to the coordinating shapes on the backside.

10. This is what it should look like:)

11. Insert gift card. I used adhesive dots to accentuate the eyes. You can glue the gun into place or tuck it under the mitten.

12. Tuck the mittens into their slots. I used ribbon at the bottom to trim the card:).

Graveyard Fence Basket

 Graveyard Fence Basket-JMRush 

Approximate size: W 3.75 x D 3.25 x H 5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock) Your file will contain only one set of ghosts.

2. Fold all score lines. Using foam adhesive squares, attach the “rip” tombstones to their coordinating solid shapes; centering them. Using foam adhesive squares, attach the ghost with cut outs to it’s coordinating solid shape; centering it.

3. Apply glue to the outside of the fence posts that have score lines. Attach to the inside coordinating fence post on the sides; aligning at the edges. 

4. Repeat until all four corners are glued and you have a box shape.

5. Insert the handle to the slot on the sides of the basket base.

6. Use foam adhesive squares to attach the combined tombstones to the coordinating shapes on the basket base; centering each one. Use foam adhesive squares to attach the combined ghost to the inside of the front tombstone.

7. I finished with ribbon for the handle and for a bow tie:)

3D Hanging Bat

3D Hanging Bat-JMRush 

Approximate size: W 9.5 x D 1.5 x H 4”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base on the front side and glue the other to the back.

3.-5. Apply glue to one side of the folded bat body piece. Attach one side of another bat body; aligning at the edges. Repeat. You will have combined four bat body pieces together.

6. This is what it will look like:)

7. Glue the combined body piece to the bat base at the coordinating shape; aligning the edges. Combine the other four bat body pieces as you did above. 

8. Glue to the backside of the bat base; aligning at the edges. This is what it should look like:)

9. Lace a string through the top hole. Tie the string. Cut the excess string and finish by curving the wings:)

3D Hanging Spider

3D Hanging Spider-JMRush 

Approximate size: W 5 x D 1.5 x H 8”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Fold all score lines. Glue an open centered circle to the coordinating shape on the spider base- on the front side and glue the other to the back.

3. Apply glue to one side of the folded spider pieces. Attach one side of another spider body; aligning at the edges.

4. Repeat. You will have combined three spider body pieces together.

5. This is what it should look like. Glue the combined body piece to the spider base at the coordinating shape; aligning the edges.

6. This is what it should look like.

7. Combine the other three spider pieces as you did above. Glue to the backside of the spider base; aligning at the edges.

8. This is what it should look like:)

9. Lace a string through the top hole.

10. Tie the string and curve the spider legs as you like.

11. Cut the excess string and finish by placing adhesive jewels for eyes:)

Spider Hanging Tea Light Lantern

Spider Hanging Tea Light Lantern-(Flameless) JMRush 

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2018/10/skull-hanging-tea-light-lantern.html

Additional tutorial images can be found here:

https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)