Puff Flower 4X6 Mailable Frame

Puff Flower 4X6 Mailable Frame-JMRush

Mailable Flat Frame size: W 4.75” X 6.5”

This self standing frame fits a 4X6 photo and can stand vertical or horizontally. This design is compatible with both 8X12 and 12X12 mats and the stand folds flat so it is perfect for mailing. 

1.Cut design pieces. (I used double sided card stock)

2.Glue the smaller Rectangular mat to the larger one.

3. Separate the kick stand leg from the frame base. (This frame can be used Horizontally or Vertically:)

4. Glue the top of the frame base to the combined mats.

5.-7. Glue the flower shapes together ( largest on bottom to smallest on top)

8. Using foam adhesive squares, attach the center circles to each flower.

9.-10. Using foam adhesive squares, attach the combined flowers to the front of your combined frame.

11. Insert picture.

12. Ta Da:)

3D Heart 4x6 Photo Frame

3D Heart 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand, decorative heart cut outs, and two 3-D hearts. This design is compatible with both 8X12 and 12X12 mats. The 3-D hearts can also be used separately. 

1.Cut out the design pieces. ( there is a rectangle shape absent from this image that is inserted at the end of the tutorial:)

2.- 5. Fold the score lines on the hearts. Apply glue to the backside of one half of one of the hearts and join it to the back half of another. Repeat this step until all 5 of this size heart is joined.

6. Repeat for the smaller sized hearts. Flip the frame base over.

7. Pre-fold all the score lines on the edges of the frame base folding them inward toward the center.

8. Insert the tabs of the frame base into the frame base slots on the other frame base piece.

9. Align and center the two pieces. 

10. -12. Glue the the inside tabs and secure into place. On the backside, apply glue to the the inside of the tab and secure to the other frame base.

13. Starting on the top edge of the frame base, apply hot glue to the very edge.

14. Place the glued edge down so that it is in alignment with the bottom score line. This is form a box.

15. Roll the box inward toward the center of the frame. This action will apply glue to the base of the frame. Hold until the glue is secure. Repeat this step for each side. (Be careful to only apply glue to the edge of each side so that the stand on the base of the frame will have mobility later and so your photo will insert easy)

16.-18. Fold the score lines on each side of each tuck tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure. Repeat for each tab.

19. -21.Apply glue to the inside of the frame careful not to glue the stand section ( the section with the score lines). You can pre-fold the stand out at this point. Place the rectangle piece inside, center, and secure into place. The edges of the frame will flex upward to allow this piece ( and your photo later) to fit inside.

22. Using foam adhesive squares, attach the combined heart to the frame.

23. I finished the frame with ribbon and an enamel dot on the ribbon:)

Poinsettia 3D 4x6 Photo Frame

Poinsettia 3D 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand and a decorative poinsettia. This design is compatible with both 8X12 and 12X12 mats. Poinsettia flower and leaves can also be used separately.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out design piece.

2. Insert the tabs of the frame base into the frame base slots.

3. 4. Align and center the pieces. On the backside. Apply glue to the inside of the tabs and secure into place.

5. Pre-fold all scored lines on the edges of the frame folding them inward toward the center. Fold all score lines on the flower pieces. For each set of the flowers- fold one in and one out.

6. Line up the points of the Largest flower set. Make sure you have one flower fold down and one up. Glue the center to secure it together.

7. Apply glue to the flower edges.

8. Secure the point pieces together working your way around the flower until all points are glued together. Repeat for the other two flower sets.

9. Attach a foam adhesive square to the center of the two largest flowers.

10. Attache the flower sections together staggering the points. Largest on bottom ascending to the smallest. Shape the petals of the flower as you like.

11. I used 4 small adhesive jewels in the center of the poinsettia . Curve the leaves as you like.

12.  Starting on the top edge of the frame base, apply hot glue to the very edge. 

13.  Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.

14. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.

15.-21. Repeat this steps for each of the frame sides. Be careful to only apply glue to the edge of each side so that the stand leg on the base of the frame will have mobility later and so  inserting your photo is easy:)

22. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.

23. Repeat for each tab.

24.Insert your photo by sliding it into place. The sides of the frame will lift up a bit to ease the photo insertion.

25. Use foam adhesive squares to attach the poinsettia and leaves onto your 3D frame:)

Christmas Lightbulb Window Picture Frame

Christmas Lightbulb Window Picture Frame - JMRush  Frame Dimensions: W5” x H 6.25”

This Christmas themed frame features a fold out stand and is sized for four “exchange” or “mini” sized (1.75 x 2.5”) pictures. Black thread is needed for the wire look of this design. 

1. Cut design pieces.
2. Separate the kickstand.
3. Apply glue to the front of the kickstand piece. Center and attach the solid frame piece making sure that the kickstand does not get glued down.
4. Apply glue down the center line going across the backside of the window piece. Apply glue to the very center line going up and down the backside of the window piece. ( Your glue should be in a cross shape). Make sure that the edges on the left and right do not get glued down so that you can insert photos:). Glue the very top and very bottom of the backside horizontally. Center and secure to the front of the combined frame pieces.
5. You can insert photos on either side:)
6. Using foam adhesive squares, center and attach the window box piece to the front bottom of the frame. Using foam squares again, attach the window box trim piece.
7. Glue the lightbulbs to their solid bases.
8. Glue the small plug in detail to the lightbulbs.
9. Layout the lightbulbs as you like.
10. Using black sewing thread, weave around the lightbulbs as you glue them into place. ( I changed the color of the frame..sorry. The beige frame was just not working for me;)

Fall Leaves 3D 4X6 Frame

Fall Leaves 3D 4x6 Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This Autumn themed frame has a intricate cut leaf design along the border and can be used vertically or horizontally. This frame features a fold out stand so everything you need to display your pictures comes complete in this file ( excluding your pictures;) This design requires a 12X12 cutting mat and contains a print and cut feature for the leaves. The leaves can also be used separately.

Sketch Toy Picture Frame

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"

1. Cut out all design pieces.
2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later:)
4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
6. Repeat this steps for each of the frame sides.
7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
8. Repeat for each tab.
9. Insert your picture.
10. Place the Sketch frame on top of the base frame and glue into place.
11. Glue the knobs together and using foam adhesive squares adhere them into place on the frame. Happy Crafting:)

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"
This design requires a 12X12 mat.