Frog Hearts Card

Frog Hearts Card-JMRush

Approximate Size: H 5.5” x W 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the card base at the score lines. Glue the Solid frog silhouette to the back of the frog silhouette with a mouth cut out. Glue the solid eye piece to the backside of the eyes with pupil cutouts.

3. Use foam adhesive squares to attach the combined eyes to the combined frog silhouette. Use a foam adhesive square to attach the second largest heart to the largest heart; centering it. 

4. Use foam adhesive squares to attach the combined Frog to the front of the card. Use pieces of foam adhesive square to attach the combined heart to the center above the frog and the single layer hearts on either side:)

Frog Skeleton

 Frog Skeleton-JMRush

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Frog Holding Hearts Box

Frog Holding Hearts Box-JMRush

Approximate box size: W 2.5” x D 1 x H 4”

This Heart Box is perfect to hold your goodies for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. The Box- Cut the box base design.
2. Flip the box base over ( pretty side down and curved tab up) Fold score lines.
3. Apply glue to the two small vertical side tabs at the bottom of the box base.
4. Secure the two small vertical side tabs to the 1 inch (width) rectangles just above them.
5. Apply glue to the very left corner of the horizontal tab just below the two side tabs that you just glued. ( My finger is pointing to the section in the photo:) Secure this corner to the vertical tab to the left.
6. Apply glue to the topside of the same vertical tab and secure the final panel creating a complete box.
7. - 9.The tab fits into the slot to close:)

The Frog-

1.Cut design pieces. 

2. Glue the frog body piece to the solid frog body base. Glue the eye piece with eye ball cut outs to it’s solid base. Use foam adhesive squares attach a small heart on each large heart.

3. Use foam adhesive squares to attach the eyes to the combined body piece and the combined hearts to each frog hand. 

4. Use foam adhesive squares to attach the combined frog to the box:)

Frog Hug Treat Box

Frog Hug Treat Box-JMRush

Approximate box size: W 3.25” x D 2.25 x H .75” (H 4” including Frog head)

This treat box features character arms that open to a small treat box. This design is perfect for Valentine’s Day or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used double sided cardstock for the card base).

2. Glue the frog face to the frog face solid base.

3. Using foam adhesive squares, attach the eyes to the frog combined face.

4. Fold the box base along score lines. It is not necessary to fold the score lines closest to the tip of each hand.

5. Apply glue to the two top tabs and secure them to the top (head) panel.

6. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

7. Using foam adhesive squares, attach the head on the front of the box.

8. -9. Apply glue to the bottom of the bottom section of the narrow strip. Attach to the center back of the box. 

10. The hands tuck into the slots on the narrow strip in the center. Attach a foam adhesive square in the center of this strip and secure the heart into place.