Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Reindeer Earmuffs Hug Gift Card Holder

Reindeer Earmuffs Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. Glue the head with cut outs to the solid antler/head shape; aligning at the top of the head. Glue the earmuff base to the coordinating shape on the card base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold bells to the red collar piece.

4. Insert gift card. Glue the black eyes to the coordinating shapes on the combined head. Glue the tiny white accent piece to the nose.

5.  Using foam adhesive squares, attach the earmuff to the earmuff base and the combined head to the collar piece;aligning at the top of the head . Using a foam adhesive square,attach the combined nose to the combined head.

6. Using foam adhesive squares, attach the combined head/collar piece to the card base; aligning at the top of the head.

7. Glue the hooves to the outside of the arms at the coordinating shapes.

8. Fold the gift card section up. Tuck the hands into the slots. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Winter Gnome Hug Gift Card Holder

Winter Gnome Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock)

2. Fold the card along score lines. Glue the black belt into place right above the first line of horizontal score lines and center it.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold square belt buckle to the center of the belt.

4.Glue the coordinating hat to the hat shape on the white head/beard piece.

5.  Insert gift card. Glue the combined head piece to the card base; aligning the beard along the edges of the top the card base.

6. Glue the hat trim piece to the combined face. Curl the green holly leaves as you like. 

7. Using foam adhesive squares attach the mustache to the combined beard/Head piece. 

8. Using a piece of foam adhesive square, attach the nose to the mustache. Glue the little red holly to the coordinating shape on the holly leaves.

9.Flip the card over. Glue the other red hat to the coordinating shape. Glue the hands into place.

10. Glue the white trim pieces just above the hands on each side. 

11. I finished with enamel jewels to accentuate the holly and a ribbon:)

( I used markers to color the enamel jewels the color I wanted:)

12.  Use a piece of foam adhesive square to attach the combined holly to the hat. 

 

Winter Squirrel Hug Gift Card Holder

Winter Squirrel Hug Gift Card Holder

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

Approximate Card size: 4” x 6.25” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided cardstock for the card base)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the white mitten edges to the outer straight edge of the mittens.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Insert gift card. 

5. Glue the beige face (with cutouts)to the combined face; aligning so that the cutouts align with the cutouts on the combined face. Glue the hat to the combined face; aligning at the top of the face.

6. Glue the hat trim piece to the combined face and attach the nose with a piece of foam adhesive square.

7. Using foam adhesive squares attach the combined face to the gift card holder base. Separate the fringe on the two pieces of scarf.

8. Glue the large scarf base just under the chin of the combined face on the card base.

9. Glue the medium sized scarf piece to the coordinating shape on the lower scarf.

10.Using a foam adhesive square, attach the smallest scarf piece to the coordinating shape on the combined scarf.

11. Flip the card base over. Glue the back of the hat to the card base; aligning at the top and sides. Glue the combined mittens into place.

12. Using foam adhesive squares, attach the hat pom pom and the tail to the backside.

13. Flip the card over. Tuck the hands into the slots on the front. 

14. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Bulldog Pup Hug Gift Card Holder

Bulldog Pup Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided cardstock for the card base) There is a small tail not shown in this tutorial that can be attached to the backside of the gift card if desired:)

2. Fold the card along score lines. Glue the face piece with holes to the coordinating solid face shape (black). Glue the small chin (gray) to the coordinating shape on the solid combined face shape. Glue the small black circle eyes to the slightly larger brown circle eyes; aligning the holes.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Attach the muzzle and ear pieces to the combined solid face with foam adhesive squares. Glue the combined eyes to the larger white solid eyes.

5. Glue the combined eyes into place and attach the nose with a piece of foam adhesive square.

6. Glue the small eyebrow lines to the combined face.

7. Using foam adhesive squares attach the combined face to the gift card holder base.

8. The gift card can be inserted into the pocket of the card base and the hands tuck into the slots on the front. Finish with ribbon:) 

Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Gnome Flip Beard Gift Card

Gnome Flip Beard Gift Card- JMRush 

Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
7. Ta Da!

Lamb Peek Pocket Card

 Lamb Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Flip the card base over and fold at score lines. Use foam adhesive squares to attach the hair with cut outs to the coordinating shape. Glue the eyes to the lamb face (with eye cutouts) and glue the hooves to the oval feet; aligning at the bottom.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket. Use foam adhesive squares to attach the combined hair to the lamb face.
4. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape. Use foam adhesive squares to attach the combined feet to the lamb base and the nose to the combined lamb face.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the lamb base to the coordinating shape on the front of the card.
7. Attach the combined lamb head to the lamb base using either foam adhesive squares or a wobble mechanism ( as shown:)