Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Cow Head Gift Tag Ornament

Cow Head Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This CowHead design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver cow head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black cow head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon to finish:)

Barn Gift Tag Ornament

Barn Gift Tag Ornament-JMR

Approximate size: H 4” X W 4.5”

This Barn design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the red barn silhouette to the brown slightly larger barn silhouette with a circular hanger. Glue the pinecone cut out shapes to the coordinating pinecone solid shapes.
3. Glue the doors to the combined barn base as shown. Use pieces of foam adhesive squares to attach the narrow barn roof to the barn base.
4. Glue the center of two of the pine needle designs together as shown. Repeat for the other two pine needle set.
5. Glue one of the pine needle sets to the barn base as shown.
6. Repeat for the other set of pine needles.
7. Tuck the combined pinecones between the pine needles and attach with glue.
8. I curved the pine needles and added a ribbon and adhesive jewel to the center of the ribbon and twine for a hanging ribbon.
9. (Optional) Flip the barn base over and glue the white barn silhouette to the back for writing a gift message:)

Cowboy Boots Gift Tag Ornament

Cowboy Boots Gift Tag Ornament-JMR

Approximate size: H 4” X W 2.25”

This Cowboy Boots Design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white boot shape and attach with glue. This space is for writing a gift message.
3. Flip the combined boots back over to the front. Glue the two boot shape to the coordinating solid brown combined boot silhouette with a circular hanger.
4. Glue the single boot shape to the combined boot shape.
5. Glue the small black shape to the negative space of the single boot.
6. Finish by adding a ribbon for a bow with a button in the center and attaching twine for a hanging ribbon:)

 

Horseshoe Star Gift Tag Ornament

Horseshoe Star Gift Tag Ornament-JMR

Approximate size: H 5” X W 4.75”

This Horseshoe Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the dark greenery to the coordinating shape on the ornament base.
3. Glue the silver ornament shape to the combined ornament base.
4. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Using pieces of foam adhesive squares, attach the light green greenery piece to the coordinating shape on the combined ornament,
6. Glue a ribbon bow just above the circular hanger.
7. (Optional) Flip the combined ornament over and center the white star shape and attach with glue. This space is for writing a gift message.
8. Flip the combined ornament back over to the front and use twine as a hanging ribbon:)

 

Cowboy Wreath Gift Tag Ornament

Cowboy Wreath Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Cowboy Wreath design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue two of the four green circular wreath together; alternating the leaves.
3. Repeat for the other two circular wreaths.
4. (Optional) Flip the ornament base over and center the white circle shape and attach with glue. This space is for writing a gift message.
5. Flip the ornament base back over to the front. Glue one set of the green wreaths to the front of the ornament base. 
6. Using pieces of foam adhesive squares, attach the last green wreath combo to the front of the ornament base alternating leaf pattern.
7. Create a bow with ribbon and attach with hot glue just below the circular hanger. I used a red and brown sharpie marker to create the color of adhesive jewel I wanted. 
8. Arrange the jewels in threes along the wreath. I finished the ornament with a button on the bow and twine for a hanging ribbon:)

 

Robot Treat Egg Holder

Robot Treat Egg Holder -JMR

Approximate size: H 4.75” X W 5.5” X D 2.5”

This easy to construct robot treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the gray rectangle with eye cutouts to the coordinating black robot head base solid shape; centering it. Using foam adhesive squares; attach the smaller silver squares to the larger gray squares.
3. Glue two of the silver C shaped robot hands to the coordinating shape on the box base. Use foam adhesive squares to attach the silver robot head shape with eye and mouth cutouts to the combined robot head.
4. Glue the combined robot head and two of the ears to the box base. Use pieces of foam adhesive squares to attach the heart to the box base and one of the small gray circles to the antenna.
5. Flip the box base over. Fold the score lines inward. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
6. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.

7. This is what it should look like:)
8. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
9. Glue the full silver rectangle, small circle antenna, remaining two ears, and remaining two C shaped robot hands to the back of the box base.

10. Flip robot over and attach the combined square feet to the front of the box base using foam adhesive squares. I added adhesive enamel jewels to enhance the eyes and a kinder egg.

Vampire Treat Egg Holder

Vampire Treat Egg Holder -JMR

Approximate size: H 5” X W 4.5” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the vampire face to the coordinating shape on the box base. Glue two of the four curve hands to the front of the full vampire shape as shown.
3. Glue the eyes and collar into place on the box base.
4. Use pieces of foam adhesive squares to attach the red bow tie and the tiny little oval nose. I used adhesive jewels to accentuate the eyes.
5. Flip the box base over. Fold the score lines inward. Flip the full silhouette over and glue the ear/neck section and two remaining hands in place.
6. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry. Use pieces of foam adhesive squares to attach the cape collar on the vampire silhouette piece.

7. Apply glue to the small horizontal tab. Tuck under the vampire figure enclosing the box.

8. Apply glue to the backside of the vampire box base and attach the solid full body shape aligning at the edges.

9. This is what it should look like:)

10. Flip the box over to the front and attach the oval red shoes with foam adhesive squares.

Frankenstein Treat Egg Holder

Frankenstein Treat Egg Holder -JMR

Approximate size: H 5” X W 4.75” X D 2.5”

This easy to construct Frankenstein treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the Frankenstein eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the small green jaw to the coordinating white jaw with teeth; aligning on the bottom and edges.
3. Using foam adhesive squares; attach the combined jaw to the coordinating shape on the full Frankenstein face; aligning at the bottom. Use foam adhesive squares to attach two of the hands to the coordinating shapes on the box base. 
4. Use foam adhesive squares to attach the combined eyes to the combined Frankenstein head. Glue the combined Frankenstein head to the coordinating shape on the box base. Using a piece of foam adhesive square, attach the small part of the tie knot to the tie base.
5. Glue the green back of the head shape and remaining hands to the full Frankenstein figure. Attach the combined tie to the front of the box base.
6. Flip the box base over (pretty side down). Fold the score lines. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

7. Apply glue to the small horizontal tab. Tuck under Frankenstein figure enclosing the box.

8. Apply glue to the back of the box base and attach the combined full figure.

9. This is what it should look like:)

10. Attach the green oval feet with foam adhesive squares.

Werewolf Treat Egg Holder

Werewolf Treat Egg Holder -JMR

Approximate size: H 5” X W 6.25” X D 2.5”

This easy to construct Werewolf treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock. (You will have two of the orange t-shirt shapes.
2. Glue the werewolf eyes with cutouts to the coordinating base solid eye shape; centering it. Flip the box base over and fold score lines.
3. Glue the combined eyes to the back of the Werewolf face shape so the the combined eyes show through.
4. Using pieces of foam adhesive squares, attach the top of the werewolf face to the full solid werewolf face shape.  Use glue to attach the mouth section.
5. Using pieces of foam adhesive squares, attach the nose to the cording shape on the werewolf face. 
6. Glue the tiny white teeth (2) to the coordinating shape on the combined werewolf head.

7.  Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.

 8. Apply glue to the small horizontal tab. Tuck under the werewolf figure enclosing the box.

9. Flip the box base over. Fold the score lines inward.

10. Apply glue to the backside of the werewolf figure and attach the solid full body shape aligning at the edges. 

11. Flip the box base over. Glue one of the orange t-shirt shapes to the front; aligning at the side edges.

12. Using foam adhesive squares, attach the combined werewolf face to the coordinating shape on the front of the box base. 

13. Using pieces of foam adhesive squares, attach the feet and ears to the coordinating shapes on the box base.

14. I used adhesive jewels to accentuate the eyes.

15. Flip box base over. Apply glue to the back of the last orange t-shirt and attach to the back of the box base.

16. Using foam adhesive squares, attach the tail to the back of the box base.

17. This is what it should look like:)

 

Campfire Smores

This file comes with the design shown. The design can be sized to fit your needs and is compatible with the 8x12 and 12x12 mats. Perfect for creating cards, layouts, shirts, totes, wood signs, wall art, vinyl, and more!

 

Hip Hip Hooray!Card- JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats and contains a gift card/money pocket.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock any glitter card stock)

2. Flip the card base over as shown. Glue the white square to the center panel and secure until dry.

3. Apply glue to the top panel around the words. Secure the glitter square pretty side down and secure until dry.

4. Fold score lines. Fold side tabs in toward the center. Apply glue to the side tabs on either side of the bottom panel. Fold the bottom panel toward toward the center panel and secure until dry. This will create a pocket.

5. Insert gift card or money.

6. Your card is complete:)

 

Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Lion Basket

Lion Basket-JMR Approximate Completed Design size: W 5.25” x D 3” x H 6” (including handle) Approximate Box Dimensions: W 3” X D 2.5” X H 2.5” 

This cute Lion Basket is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222 

 You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. (I used double sided card stock)

2. Flip the basket base over as shown and fold score lines on the basket base.  Glue the Lion face with eye holes to the solid lion face. Glue the solid black back paws to the solid yellow paws; centering them.

3. Apply glue to the two top tabs on the basket base and attach to the center box.

4. Repeat for the lower two tabs; creating a box.

5. Your box should look like this.

6. Attach the two mane pieces together with a foam adhesive square. Attach the nose to the muzzle piece and the top of the tail to the tail base with a foam adhesive square.

7. Use foam adhesives squares to attach the combined mane to the center of the lion face on the box base. Glue the paw prints to the combined paw prints. Use foam adhesives squares to attach the combined muzzle to the combined lion head.

8. Use foam adhesive squares to attach the combined lion head to the combined mane on the box base.

9. Turning the box base around, Attach the combined paws and combined tail with foam adhesive squares.

10. Insert the handle into the slots on either side of the box base.

11. -12. I used enamel adhesive jewels to accentuate the eyes and finished with a ribbon:)