Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Cowboy Boots Gift Tag Ornament

Cowboy Boots Gift Tag Ornament-JMR

Approximate size: H 4” X W 2.25”

This Cowboy Boots Design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white boot shape and attach with glue. This space is for writing a gift message.
3. Flip the combined boots back over to the front. Glue the two boot shape to the coordinating solid brown combined boot silhouette with a circular hanger.
4. Glue the single boot shape to the combined boot shape.
5. Glue the small black shape to the negative space of the single boot.
6. Finish by adding a ribbon for a bow with a button in the center and attaching twine for a hanging ribbon:)

 

Gingerbread Man Gift Tag Ornament

Gingerbread Man Gift Tag Ornament- JMRush 

Approximate Tag size: H 4.25” X W 3.25”

This Gingerbread man design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Flip the gingerbread man base over and glue the white gingerbread man base to it; centering it. Glue the round gingerbread man head with holes to the coordinating solid head base. 
3. Flip the combined base over. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
4. Glue the two hand and two foot curvy pieces to the combined base. Glue the combined nose to the combined face.
5. Use foam adhesive squares to attach the combined head and combined candy pieces to the front of the card base.
6. I used enamel adhesive jewels to accentuate the eyes and finish with a ribbon:)

Joy Santa Gnome Card

Joy Santa Gnome Card- JMRush 

Approximate Card size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Glue the largest Gnome suit piece to the full solid gnome figure. Glue to hat base piece to the gnome head base. Glue the holly berries to the holly base. 
3. Glue the small Gnome suit piece to the combined full Gnome figure; aligning at the bottom center and edges. Glue the hat brim piece to the combined gnome head piece.
4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the nose/mustache to the combined head and the green wreath to the black wreath base.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. Glue the combined holly to the hat.
6. Use foam adhesive squares to attach the combined gnome head to the gnome body base. Glue the lettering to the coordinating shapes on the card base.
7. Use foam adhesive squares to attach the combined gnome to the front of the card. I used adhesive enamel jewels to decorate the wreath:)

Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Gnome Flip Beard Gift Card

Gnome Flip Beard Gift Card- JMRush 

Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
7. Ta Da!

Polar Bear Basket

Polar Bear Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.75” X W 4.5” including handle

This basket design is a perfect container for candies or small party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock) 

2. Flip the basket base over. Fold the basket base at the score lines. Glue the feet (with cut outs) to the solid feet bases.  Glue the two mittens to the coordinating shape of the full mitten pieces.

3.  Apply glue to the two top tabs of the box base and secure them to the top (head) panel. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

4. Using foam adhesive squares, attach the combined feet and the tail to the back side of the basket.

5. Glue the large hat piece to the backside of the front of the basket; pretty side facing forward.

6. Using pieces of foam adhesive squares; attach the hat brim piece to the front of the basket.

7. Attach the nose to the oval muzzle and then attach the combined muzzle to the front of the basket using foam adhesive squares.

8. Apply glue to the outer edges (left and right) of the backside of the scarf piece and glue to the front of the basket (covering part of the combined muzzle). Glue the eyes into place.

9. I used adhesive jewels to accentuate the eyes. Using foam adhesive squares; attach the combined mittens and the poof ball to the hat.

10. Insert the handle into the slots on each side of the basket.

11. Finish with a ribbon:)

Christmas Bus Card

Christmas Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

1.Cut design pieces. I used double sided card stock. (Please excuse the edited blobs on the tutorial images) 

2. Glue the smaller bus to the larger one. Glue the largest present box to the coordinating shape on the combined bus. Fold the card base.

3. Glue the red bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the two smaller presents.

4. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the four solid circles to the inside of the open circles. Glue the last solid circle to the center of the bus; centering it.

5. Glue the three shiny red ribbon pieces to the presents at the top of the bus; largest on in the middle. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. Use pieces of foam adhesive squares to attach the bottom silver bumper piece.

6. Curve the three wreath pieces as you like and place them on top of each other; smallest on top and alternating branches.

7. Glue the wreath pieces inner circles together keeping placement. Glue the combined wreath to the front of the combined bus; centering it over the center circle.

8. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it. Finish with a bow on the wreath:)

Christmas Hanging Tea Light Lantern

Christmas Hanging Tea Light Lantern (Flameless)-JMRush

Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Cricut measurements for grouping: w 11.8917

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the two lantern base pieces over. Glue the snow window pieces to the coordinating shapes on the bases. Make sure that they align properly on the face down side.

3. Glue the vellum paper to the window panels; centering around each of the cut out sections.

4. Fold all score lines. 

5. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

6. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box. Hold until secure.

7. This is what it should look like:)

8. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle. Repeat for the rest of the top tabs until fully enclosed. Glue the two circular hangers together hold until secure.

9. I use a tool to help secure the tabs from the inside of the lantern.

10. This is what it should look like:)

11. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

12. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides; creating a shallow box.

13. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

14. Tuck the end tab into the slot creating a circular tube shape. Secure until dry.

15. Place the narrow circular ring piece and square piece over the tube shape you just created.

16.-17. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

18.-19. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top. This is what it should look like:)

20. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

21. Glue the little snowflakes to the window sections of the lantern.

22. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. 

23. Use a piece of foam adhesive square to attach the two snowflakes together. Smaller one on top. Use a adhesive jewel to accentuate the center.

24. I finished this lantern with a ribbon:)

Boy Reindeer Hug Gift Card Holder

Boy Reindeer Hug Gift Card Holder-JMR

Approximate Card size: 4” x 7.5” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

1.Cut design pieces. I used double sided card stock.

2. Fold the card along score lines. Glue the nose (with a tiny circle hole) to the solid circle nose base. Glue the reindeer head (with cutouts ) to the reindeer head with antlers. Glue the oval mouth (with smile cutout) to the solid oval mouth base. Glue the combined jingle bell to the solid jingle bell base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4. Insert gift card. Glue the combined reindeer head to the card base;aligning at the top and edges and centering it.

5. Glue the eyes and ears into the coordinating shapes on the combined card base. Glue the collar piece under the combined head piece on the card base.

6.Glue the eyeballs on to the eyes. Glue the combined jingle bell to the collar piece.

7. Flip the card over and glue the hooves to the coordinating shapes on the arms of the card base.

8. Glue the combined mouth piece into place.

9. Use a foam adhesive square to attach the combined nose to the combined mouth piece.

10. This is what it should look like:) Tuck the hooves into their slots. I used ribbon to trim the card:).

Christmas Hug Gift Card Holders that you may also be interested in:)

Blue Snow Bird Hug Gift Card Holder

Blue Snow Bird Hug Gift Card Holder-JMR

Approximate Card size: 4” x 5.75” 

This card features character arms that open to release a hidden gift card section. The bird has a tail on the backside:) This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.( I changed the color of the combined scarf, earmuffs, and the tail piece from the beginning of this tutorial) There are two wing pieces included in your file that are not shown at the beginning of this tutorial.

2. Fold the card along score lines. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the scarf base to the bird head/chest piece.

3. Glue the bird head/chest piece to the coordinating shape on the card base; center and align at the top and edges.

4. Glue the earmuff base and eyes in place.

5. Glue the small black eyeballs into place. I used adhesive dots to accentuate the eyes onto of the black eyeballs. Using foam adhesive squares, attach the earmuffs, beak, feet, and scarf square into place. Insert the gift card. 

6. Flip the card over. Using an adhesive foam square, attach the tail piece. Glue the two wings to their coordinating shapes on the card base. Tuck the wings into their slots. I used ribbon to trim the card:).