Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Running Horse Gift Tag Ornament

Running Horse Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Running Horse design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Glue the horse circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon for a bow and twine for a hanging ribbon:)

Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Vampire Gift Tag Ornament

Vampire Gift Tag Ornament-JMRush

Approximate Size: W 3.25” x H 4.5”

This simple to construct design would be perfect to label your goodies for Halloween parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the hair piece to the coordinating shape on the round head piece with eye mouth cut outs. Glue the hands to the coordinating shapes on the tag base. Glue the white collar sleeve piece in place on the combined tag base. Glue the tiny oval to the nose base; aligning at the top.

3. Glue the combined nose to the head piece. Glue the bow tie and buttons to the tag base.

4. Place the combined head over the tag base aligning at the top and sides of the coordinating shape. Using a pencil, mark where the eyes should be places.

5. Remove combined head and place enamel jewels on the pencil marks. (I added a ribbon over the bow tie and adhesive jewels over the buttons.)

6. Attach the combined head with adhesive foam squares.

7. This is what it should look like:)

8. Flip the design over and glue the white body shape into place so that you have a place to write (optional).

 

Black Cat Open Mouth Treat Box

Black Cat Open Mouth Treat Box-JMRush

Approximate Size: W 5” x D 1.25”x H 5.5”

Approximate Box size: W 2.5” x D 1 x H 4” 

This box opens by lifting the character’s head to to expose the opening to the treat box. This simple to construct design would be perfect to hold your goodies for Halloween or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Fold the box and Mouth base at the score lines.

3. Glue the pink mouth piece (with holes) to the coordinating shape on the mouth base;aligning at the inner oval cut out shape.

4. Use pieces of foam adhesive squares to attach the teeth shapes to the coordinating shapes on the combined mouth base.

5.  Glue the two tiny oval white pieces to the coordinating shapes on the eyes. This is what it should look like:)

6. Flip the mouth base top over, like so. Glue the Cat head to the coordinating shape; aligning at the top of the ears.

7. I used an orange marker on the edges of the cat eyes. Glue the cat eyes into place.

8. Place the Cat nose on the cat face to find placement and then remove.

9. Cut thread ( approximately three strands of 4inches).

10. Attach the threads with glue to the area you picked to place the Cat nose. Allow to dry.

11. Using a foam adhesive square, place the Cat nose on top of the threads.

12. I used adhesive jewels to accent the eyes.

13. Apply glue to the small vertical side tab at the left side of the bottom of the box base.

14. Secure the small vertical side tab to the 1 inch (width) rectangles just above. 

15. Apply glue to the very left vertical tab, the horizontal tab, and the side tab on the bottom right and attach the side and bottom of the base…wrapping it crating a box.

16. This is what it should look like:)

17. Tuck the tab into the slot on the top.

18. Flip the box base over and apply glue to the area just outside the oval cut out.

 19. Attach the combined Cat head; centering it around the cut out oval shape and allow to dry.

20. I finished by adding a ribbon and filling with fun sized candies.

Hummingbird Lantern (Flameless)

Hummingbird Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7.5” (H 8” with Circle Hanger)

This Flameless lantern features a hummingbird design which is wrapped around each of the four sides. A layered transparent frosted effect is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the two lantern pieces over ( pretty side down) and apply glue around the inner edge of the opening and attach the vellum rectangles. ( Helpful hint:You may need to place a heavy object (book) on top of the vellum to keep it from getting wavy while drying).

3. Apply glue to the circle hanger hanger and attach to the top of the second and fourth peak on the lantern base as shown. ( Makes sure that both are placed symmetrically in height).

4. Flipping the combined lantern bases over, apply glue to the backside of the green hummingbird panels and align over each silhouette window on the combined lantern base.

5. Apply glue to the backside of the side view flower and attach to the coordinating shape on the combined lantern base.

6. Using foam adhesive squares, attach the hummingbird silhouettes to the hummingbird window panels; aligning with each coordinating shape.

7. Apply glue to the backside of the combined hummingbird window panels and attach to the coordinating shapes on the combined lantern base.

8. Apply glue to the long side tab on the right hand side of the second combined lantern base.

9. Attach the first combined lantern base on top of the second combined lantern base’s tab and secure (joining the two base pieces). Make sure the panels are aligned at the bottom. Glue the last purple flower piece to each coordinating shape on each panel.

10. Fold the lantern base at the score lines. Apply glue to the first combined lantern base’s long side tab on the very left side. Secure the long side tab to the other side creating a box. 

11. It should look like this:)

12. Image of the side edge secured.

13. Apply glue to the top tab with the circle hanger and secure it to the triangular panel to it’s left side.

14.-18. Repeat for the next tab. Continue applying glue to the top tabs until the top is complete. Apply glue to the other side of the circle hanger piece and secure to the opposite side inside the lantern.

19. I use a long object (pencil) to help secure the tabs from the inside of the lantern top.

20. Curve the flower petals and leaves as you like.

21. Using foam adhesive squares, attach the purple flower to the black flower base; alternating the petals.

22. Repeat for the silver flower to the combined flower. Glue the inside tiny green flower shape to the inside of the combined flower.

23. Glue the leaves on the back of the combined flower.

24. Using a foam adhesive square, attach the combined flower to the lantern on the side which has the circle hanger facing you.

25. Fold the score lines on the lantern square base.

26. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

27. Repeat for the bottom two tabs creating a shallow box.

28. It should look like this:)

29.-30. Place a flameless candle inside and the lantern top in it’s base.( I used a W 2.75” x H 4” pillar flameless candle).

Bunny Boy Girl 3D Stand Up

Bunny Boy Girl 3D Stand Up- JMRush 

Approximate size: W 3.25” X H 5.75” X 2.75”D

This cute Bunny decoration stands independently. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock. This tutorial shows both the boy and girl bunny)

2. Glue the bunny with cutouts to the bunny base with whiskers.

3. Flip the combined bunny over and glue the solid bunny to the combined bunny. Glue the orange carrot to the carrot base.

4. Glue one of the jumpers to the combined bunny base.

5. Flip the combined bunny over ( right side up). Fold the six bunny tummies at the score lines.

6. Apply glue to one side of one of the tummy pieces and attach another tummy piece aligning the edges.

7. It should look like this.

8. Continue glueing tummy pieces until you have three in each group. Two groups.

9. It should look like this.

10. Find the two tummy pieces that are single layer and apply glue to the backside.

11. Attach the combined tummy piece to the combined bunny base aligning at the bottom. Using foam adhesive squares, attach the combined carrot and the bowtie (hair bow for the girl)

12. Flip the combined bunny over and glue the last combined tummy to the backside.

13. The Girl bunny’s collar is attached by pieces of foam adhesive square and the tiny blue dot is glued to the center of the collar.

14. Bunnies:)

Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)