Layered Snowman

Layered Snowman-JMR

This design is compatible with the 8x12 and 12x12 mats. Perfect for shirts, totes, wood signs, wall art, vinyl, and more!

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Wagon Wheel Gift Tag Ornament

Wagon Wheel Gift Tag Ornament-JMR

Approximate size: H 3.75” X W 3.25”

This wagon wheel design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver hollow circle shape to the coordinating spoked brown silhouette with a circular hanger. Glue the smallest silver hollow circle to the small brown hollow circle; centering it.
3. Glue the brown hollow circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and attach the white circle with glue. This hollow circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon and twine for a hanging loop:)

Cowboy Hat Gift Tag Ornament

Cowboy Hat Gift Tag Ornament-JMR

Approximate size: H 2.5” X W 4”

This Cowboy Hat design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the hat shape with cut outs to the brown hat base.
3. Glue the smaller hat shape to the coordinating shape on the combined hat.
4. Glue the smallest hat shape to the combined hat.
5. Glue the thin long brim piece to the coordinating shape on the combined hat. Glue the small red hat band into place on the combined hat.
6. (Optional) Flip the combined ornament over and center the white hat shape and attach with glue. This shape is for writing a gift message.
7. Flip the combined ornament over and attach a piece of twine for hanging:)

Windmill Gift Tag Ornament

Windmill Gift Tag Ornament-JMR

Approximate size: H 5” X W 2.5”

This Windmill design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white windmill and attach with glue. This shape is for writing a gift message.
3. Return the ornament to the front. Glue the brown “x” design frame work shape to the coordinating shape on the combined base.
4. Attach the silver windmill to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

Bull Head Gift Tag Ornament

Bull Head Gift Tag Ornament-JMR

Approximate size: H 4.25” X W 4.25”

This Bull Head design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver bull head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black bull head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon and a jingle bell to finish:)

 

Sheriff Star Gift Tag Ornament

Sheriff Star Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This Sheriff Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver barb wire ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. (Optional) Flip the combined ornament over and center the white star and attach with glue. This star is for writing a gift message. 
4. Return the ornament to the front. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

 

Layered Tree

Layered Tree-JMR

Approximate size: H 2.75” X W 1.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the green tree with cut outs to the solid green tree.
3. Glue the combined tree to the solid brown tree silhouette:)

 

Alien Treat Egg Holder

Alien Treat Egg Holder -JMR

Approximate size: H 5” X W 2.5” X D 2.5”

This easy to construct alien treat egg holder is compatible with both 8X12 and 12X12 mats and is sized to hold a Kinder Joy chocolate egg. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the alien eyes with cutouts to the coordinating base solid eye shape; centering it. Glue the Green half alien face with cut outs to the white half alien face with cute outs and teeth; centering and aligning at the top.
3. Ignore this image- This image shows the box base and full figure flipped over. Do NOT glue the full figure to the box base at this point. I discovered during assembly that it is easier to glue it onto the back after assembly. This tutorial shows it glued into place. My mistake. 
4. Using foam adhesive squares, attach the full alien head to the cording shape on the front of the box base.
5. Glue the combined eyes and pink inside of the mouth into place.
6. Using pieces of foam adhesive squares, attach the hands, combined half face, and antennas to the coordinating shapes on the box base.
7. This is what it should look like:)
8. Flip the box base over. Fold the score lines inward.

1. Apply glue to the two side tabs. Fold the bottom section up to meet the tabs creating a box. Hold until dry.
2. Apply glue to the small horizontal tab. Tuck under the alien figure enclosing the box.
3. Image of tucking the tab.
4. Image of tucking the tab.
5. Match up the full figure to the backside of the box base making sure the top matches. Apply glue and attach to the back of the box base.
6. This is what it should look like:)

 

Doberman Pinscher Basket

Doberman Pinscher Basket-JMR

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: W 4” X H 5.5” X D 2.5” including handle

This cute Doberman Pinscher Dog Basket is a perfect gift container for dog lovers or for dog treats.

1.Cut design pieces. (I used double sided card stock) ( there is an additional nose base incase you want to switch the color behind his nostrils. I didn’t use it in the main photo)

2. Glue the doberman face (with cutout ears) to the face base; aligning at ears and sides. (The face base is slightly smaller than the face with cut outs.) Glue the tiny black eye pupils to each of the round iris eyes with cutouts; aligning around the cutouts. Glue the black paw prints to the gray paw print bases; centering them.

3.Glue the inner ears to the coordinating shapes on the combined doberman face. Glue the last paw print shapes (with cutouts) to the combined paw prints centering them.

4.Using foam adhesive squares, attach the paws to the coordinating shapes on the front leg shapes. ( helpful hint; You can use a marker to color your squares to match the color of paper you are using to make them less noticeable) Glue the combined eyes to the white eye circles. ( You can position the pupils differently to achieve different expressions. I place mine in the center and later added enamel jewels a little lower on the eye) Apply glue to the top of the eyebrow/cheek (brown) piece and a foam adhesive square to the middle. Attach the gray eyebrow/nose. 

5. This is what it should look like.

6. Flip this combined piece over. Apply glue to the top section and adhesive squares to each side as shown. Attach to the combined face base.

7.Glue the combined eyes into place. You can glue the nose to the nose base or leave the nose shape see through to capture the color underneath. Curve the tongue.

8.  Glue the nose in place. Apply glue to the back of the tongue and attach to the area directly under the nose.

9. This is what it should look like.

10. Using foam adhesive squares, attach the combined dog face to the coordinating shape on the box base.

11. Apply glue to the backside top of the combined legs and an adhesive square to the bottom. Attach to the box base as shown.

12. Fold the box at the score lines as shown.

13. Flip the box base over as shown. Apply glue to the two top tabs and secure to the rounded section above.

14. Apply glue to the two remaining tabs and secure to the dog shape section below creating a box.

15. Insert the handle to the slot on either side of the basket.

16. Using foam adhesive squares, attach the combined paws and tail to the backside of the basket.

17. I finished with a ribbon.

 

Mom Hawaiian Floral Card

Mom Hawaiian Floral Card-JMRush

Approximate Size: W 5.5” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock and vellum paper for the circular window piece.
2. Flip the card base over and glue the vellum piece to the coordinating opening on the card. 
3. Glue the open circle piece over the vellum paper; centering it.
4. Flip the card base over. Glue the Mom design piece to the coordinating shape; centering the word Mom with the card base.
5. Glue the large floral base aligning with the coordinating shape on the card base.
6. Glue the green palm leaves in place.
7. Glue the medium floral base into place; aligning with the coordinating shapes on the combined card base.
8. Glue the smaller (2) hibiscus flowers and small leaves (2) to the coordinating shape on the combined base.

1. Glue the smaller pistil bases (2) to the smaller hibiscus flowers.
2. Glue the yellow pistils to the pistil bases.
3. Glue the last floral base to the coordinating shape on the card base.
4. Glue the last Hibiscus flower and larger leaves (2) to the coordinating shapes on the card base.
5. Glue the large pistil base in place.
6. Glue the yellow pistil to the coordinating shape.
7. your card should look like this:)

 

Vampire Gift Tag Ornament

Vampire Gift Tag Ornament-JMRush

Approximate Size: W 3.25” x H 4.5”

This simple to construct design would be perfect to label your goodies for Halloween parties. This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces. ( I used double sided card stock)

2. Glue the hair piece to the coordinating shape on the round head piece with eye mouth cut outs. Glue the hands to the coordinating shapes on the tag base. Glue the white collar sleeve piece in place on the combined tag base. Glue the tiny oval to the nose base; aligning at the top.

3. Glue the combined nose to the head piece. Glue the bow tie and buttons to the tag base.

4. Place the combined head over the tag base aligning at the top and sides of the coordinating shape. Using a pencil, mark where the eyes should be places.

5. Remove combined head and place enamel jewels on the pencil marks. (I added a ribbon over the bow tie and adhesive jewels over the buttons.)

6. Attach the combined head with adhesive foam squares.

7. This is what it should look like:)

8. Flip the design over and glue the white body shape into place so that you have a place to write (optional).

 

Mummy Candy Keeper

Mummy Candy Keeper-JMRush

Approximate size: W 6 x D .75 x H 4.5”

This design features a character head and hands that covers a shallow bin that is designed to fit regular sized candy bars up to 6 inches long or small treats. This design is compatible with both 8X12 and 12X12 mats.

Inside

Back

1.Cut design pieces. ( I used double sided card stock paper)

2. Fold the keeper base at the score lines. Glue the small hands to the larger design piece hands; centering and lining up at the wrists. Glue the mummy wrap face to the skull shape; centering.

3. Apply glue to the front tabs in the front of the keeper base and attach to the front rectangle shape as shown. Hold until secure.

4. Apply glue to the second back set of tabs and glue to the backside of the keeper forming a box.

5. Your keeper base should look like this:)

6. Flip the skull and hands down over the box. Apply glue to the backside of the combined mummy skull and combined hands and attach to the coordinating shape on the keeper base. 

 7. Apply glue to the backside of the eyes and attach to the coordinating shapes on the combined keeper base.

8. Flip the keeper base over. Apply glue to the script and attach to the backside of the keeper base.

9. I finished this design by adding candy and a ribbon:)

Hummingbird Lantern (Flameless)

Hummingbird Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7.5” (H 8” with Circle Hanger)

This Flameless lantern features a hummingbird design which is wrapped around each of the four sides. A layered transparent frosted effect is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper)

2. Flip the two lantern pieces over ( pretty side down) and apply glue around the inner edge of the opening and attach the vellum rectangles. ( Helpful hint:You may need to place a heavy object (book) on top of the vellum to keep it from getting wavy while drying).

3. Apply glue to the circle hanger hanger and attach to the top of the second and fourth peak on the lantern base as shown. ( Makes sure that both are placed symmetrically in height).

4. Flipping the combined lantern bases over, apply glue to the backside of the green hummingbird panels and align over each silhouette window on the combined lantern base.

5. Apply glue to the backside of the side view flower and attach to the coordinating shape on the combined lantern base.

6. Using foam adhesive squares, attach the hummingbird silhouettes to the hummingbird window panels; aligning with each coordinating shape.

7. Apply glue to the backside of the combined hummingbird window panels and attach to the coordinating shapes on the combined lantern base.

8. Apply glue to the long side tab on the right hand side of the second combined lantern base.

9. Attach the first combined lantern base on top of the second combined lantern base’s tab and secure (joining the two base pieces). Make sure the panels are aligned at the bottom. Glue the last purple flower piece to each coordinating shape on each panel.

10. Fold the lantern base at the score lines. Apply glue to the first combined lantern base’s long side tab on the very left side. Secure the long side tab to the other side creating a box. 

11. It should look like this:)

12. Image of the side edge secured.

13. Apply glue to the top tab with the circle hanger and secure it to the triangular panel to it’s left side.

14.-18. Repeat for the next tab. Continue applying glue to the top tabs until the top is complete. Apply glue to the other side of the circle hanger piece and secure to the opposite side inside the lantern.

19. I use a long object (pencil) to help secure the tabs from the inside of the lantern top.

20. Curve the flower petals and leaves as you like.

21. Using foam adhesive squares, attach the purple flower to the black flower base; alternating the petals.

22. Repeat for the silver flower to the combined flower. Glue the inside tiny green flower shape to the inside of the combined flower.

23. Glue the leaves on the back of the combined flower.

24. Using a foam adhesive square, attach the combined flower to the lantern on the side which has the circle hanger facing you.

25. Fold the score lines on the lantern square base.

26. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

27. Repeat for the bottom two tabs creating a shallow box.

28. It should look like this:)

29.-30. Place a flameless candle inside and the lantern top in it’s base.( I used a W 2.75” x H 4” pillar flameless candle).

Reindeer Earmuffs Hug Gift Card Holder

Reindeer Earmuffs Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  

1.Cut design pieces. (I used double sided card stock)

2. Fold the card along score lines. Glue the head with cut outs to the solid antler/head shape; aligning at the top of the head. Glue the earmuff base to the coordinating shape on the card base.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base. Glue the gold bells to the red collar piece.

4. Insert gift card. Glue the black eyes to the coordinating shapes on the combined head. Glue the tiny white accent piece to the nose.

5.  Using foam adhesive squares, attach the earmuff to the earmuff base and the combined head to the collar piece;aligning at the top of the head . Using a foam adhesive square,attach the combined nose to the combined head.

6. Using foam adhesive squares, attach the combined head/collar piece to the card base; aligning at the top of the head.

7. Glue the hooves to the outside of the arms at the coordinating shapes.

8. Fold the gift card section up. Tuck the hands into the slots. I finished with enamel jewels to accentuate the eyes and a ribbon:)