Penguin Sweater Hug Gift Card Holder

Penguin Sweater Hug Gift Card Holder

Approximate Card size: 4” x 7.” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial and alternate images can be found on my blog.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com 

1.Cut design pieces. (I used double sided cardstock) ( There are two additional earmuff pieces included in this file that are not shown in this tutorial until the end.)

2. Glue one of the sweater chest pieces to the coordinating shape on the base. Glue the sweater sleeves on either side on the coordinating shapes.

3. Glue the penguin face (with cut outs) and the ear muff base to the coordinating shapes on the base.

4. Using foam adhesive squares, attach the beak and the sweater collar to the combined base.

5. Using foam adhesive squares, attach the earmuffs to the coordinating shapes on the combined base.

6. Fold the card along score lines.

7. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

8. Insert gift card.

9. Fold the gift card section up. Glue (only the edges) the rectangle to the coordinating bottom section making sure that the score lines align and that the score lines are not glued down.

10. Flip the card over. Glue the other sweater chest piece to the coordinating shape and glue the remaining sleeve pieces to the each side.

11. Using foam adhesive squares, attach the remaining ear muff pieces and the remaining collar piece.

12. Flip the combined card base over and Tuck the hands into the slots.

13. I finished with enamel jewels to accentuate the eyes and a ribbon:)

 

Penguin Hug Candy Pocket

Penguin Hug Candy Pocket- JMRush 

Approximate size: W 4.75” X H 6.5”

Approximate Pocket size: W 2.5” X H 3.25”

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. (I used doubled sided card stock for the base.)

2. Fold the score lines on the pocket base. Glue the Penguin silhouette with eye and beak cut outs to the coordinating shape on the pocket base; aligning at the top.

3. Glue the hat into place; aligning at the top. Attach the puff ball and beak with a foam adhesive square.

4.-5. Apply glue to the side tabs on the pocket base. Fold forward and secure to the penguin shape of the pocket base.

6. Apply glue to the front of the combined pocket base on the top rectangular piece. Secure the bottom section of penguin to the glue on the rectangle; aligning at the top edge of the rectangle and centering it.

7.-8.Make sure that the cut lines on the oval shaped piece are open. ( I used a small dowel rod to lift up the center in between the two slots.)  Apply glue to the backside edges of this piece and secure to the front of the combined pocket base; aligning at the top edge and centering it. (Make sure the slots are not glued down)

9. Tuck the hands into the slots. Attach the heart with a foam adhesive square in the center between the hands. I finished by adding enamel dots to accentuate the eyes and placed a chocolate square in the pocket:)

Penguin Heart Card

Penguin Heart Card- JMRush 

Approximate size: W 4.25” X H 5.5”

The Penguin Heart Card has a three 3D hearts across the Penguin’s belly and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. 

2. Fold the score lines on the card base and the hearts. Glue the penguin shape with cut outs to the solid penguin shape; aligning at the top.

3. Apply glue to one side of one of the hearts.

4. Secure one side of another heart; matching the curved shape.

5. Repeat adding another heart. Three in total for each heart. Repeat for the other two sets of hearts.

6. Apply glue to the backside of one of the combined hearts (single layered pieces) 

7.-8. Attach to the three heart banner piece. Repeat for the other two combined heart pieces. ( I attached the two side hearts and then the middle one) Glue the hat to the combined penguin.

9. Use a foam adhesive square to attach the beak and hat pom pom. Apply glue to the backside edges of the combined heart banner and attach to the combined penguin.

10. Apply glue to the backside of the combined penguin and attach it to the front of the card:)

Penguin Snowball Fight Card

Penguin Snowball Fight Card-JMRush

Card size: W 4.25" X 5.5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the card at the score lines. Glue the Penguin body to it;s solid base.
3. Using foam adhesive squares, attach the Penguin’s beak and the snowballs to the snowball solid base.
4. Use a foam adhesive square to attach a snowball to the penguin’s hand.
5. Glue the penguin and snowball pyramid to the card base:)

Penguin Hug Gift Card Holder

Penguin Hug Gift Card Holder-JMRush

Approximate Card size: 4” x 6.5” 

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold the card along score lines.

3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.

4.Glue the Oval Body piece to the Card Base.

5.Attach the nose onto the head with a adhesive foam square. Glue the Hat Base on and the puff ball onto the hat base. Using foam adhesive squares, attach the hat brim onto the hat base.

6. Glue on the mitten pieces to the back of each wing. Using pieces of foam adhesive squares attach the mitten trim pieces onto each mitten.

7. Insert gift card.

8. The mittens tuck into the slots on the card base to close the card:)