Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Wagon Wheel Gift Tag Ornament

Wagon Wheel Gift Tag Ornament-JMR

Approximate size: H 3.75” X W 3.25”

This wagon wheel design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver hollow circle shape to the coordinating spoked brown silhouette with a circular hanger. Glue the smallest silver hollow circle to the small brown hollow circle; centering it.
3. Glue the brown hollow circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and attach the white circle with glue. This hollow circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon and twine for a hanging loop:)

Windmill Gift Tag Ornament

Windmill Gift Tag Ornament-JMR

Approximate size: H 5” X W 2.5”

This Windmill design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white windmill and attach with glue. This shape is for writing a gift message.
3. Return the ornament to the front. Glue the brown “x” design frame work shape to the coordinating shape on the combined base.
4. Attach the silver windmill to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

Cow Head Gift Tag Ornament

Cow Head Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This CowHead design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver cow head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black cow head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon to finish:)

Barn Gift Tag Ornament

Barn Gift Tag Ornament-JMR

Approximate size: H 4” X W 4.5”

This Barn design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the red barn silhouette to the brown slightly larger barn silhouette with a circular hanger. Glue the pinecone cut out shapes to the coordinating pinecone solid shapes.
3. Glue the doors to the combined barn base as shown. Use pieces of foam adhesive squares to attach the narrow barn roof to the barn base.
4. Glue the center of two of the pine needle designs together as shown. Repeat for the other two pine needle set.
5. Glue one of the pine needle sets to the barn base as shown.
6. Repeat for the other set of pine needles.
7. Tuck the combined pinecones between the pine needles and attach with glue.
8. I curved the pine needles and added a ribbon and adhesive jewel to the center of the ribbon and twine for a hanging ribbon.
9. (Optional) Flip the barn base over and glue the white barn silhouette to the back for writing a gift message:)

Running Horse Gift Tag Ornament

Running Horse Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Running Horse design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Glue the horse circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon for a bow and twine for a hanging ribbon:)

Horseshoe Star Gift Tag Ornament

Horseshoe Star Gift Tag Ornament-JMR

Approximate size: H 5” X W 4.75”

This Horseshoe Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the dark greenery to the coordinating shape on the ornament base.
3. Glue the silver ornament shape to the combined ornament base.
4. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Using pieces of foam adhesive squares, attach the light green greenery piece to the coordinating shape on the combined ornament,
6. Glue a ribbon bow just above the circular hanger.
7. (Optional) Flip the combined ornament over and center the white star shape and attach with glue. This space is for writing a gift message.
8. Flip the combined ornament back over to the front and use twine as a hanging ribbon:)

 

Cowboy Wreath Gift Tag Ornament

Cowboy Wreath Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4”

This Cowboy Wreath design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue two of the four green circular wreath together; alternating the leaves.
3. Repeat for the other two circular wreaths.
4. (Optional) Flip the ornament base over and center the white circle shape and attach with glue. This space is for writing a gift message.
5. Flip the ornament base back over to the front. Glue one set of the green wreaths to the front of the ornament base. 
6. Using pieces of foam adhesive squares, attach the last green wreath combo to the front of the ornament base alternating leaf pattern.
7. Create a bow with ribbon and attach with hot glue just below the circular hanger. I used a red and brown sharpie marker to create the color of adhesive jewel I wanted. 
8. Arrange the jewels in threes along the wreath. I finished the ornament with a button on the bow and twine for a hanging ribbon:)

 

Joy Santa Gnome Card

Joy Santa Gnome Card- JMRush 

Approximate Card size: H 4.25” X W 5.50”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Glue the largest Gnome suit piece to the full solid gnome figure. Glue to hat base piece to the gnome head base. Glue the holly berries to the holly base. 
3. Glue the small Gnome suit piece to the combined full Gnome figure; aligning at the bottom center and edges. Glue the hat brim piece to the combined gnome head piece.
4. Glue the square buckle into place. Use pieces of foam adhesive squares to attach the nose/mustache to the combined head and the green wreath to the black wreath base.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. Glue the combined holly to the hat.
6. Use foam adhesive squares to attach the combined gnome head to the gnome body base. Glue the lettering to the coordinating shapes on the card base.
7. Use foam adhesive squares to attach the combined gnome to the front of the card. I used adhesive enamel jewels to decorate the wreath:)

Polar Bear Flip Gift Card

Polar Bear Flip Gift Card- JMRush 

Approximate Card size: H 6” X W 4.25”

This design has a gift card pocket under the Polar bear’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest bear suit piece to the middle layer of the card base. Glue the small bear suit piece to the black bear bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base.
3. Glue the silver buckle to the combined bear pants. Glue the oval white mouth with cut outs to the coordinating solid black mouth piece; aligning at the center top. Glue the button with holes to the coordinating black button base. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Use pieces of foam adhesive squares to attach the puff ball to the hat base and the brim to the hat brim base. 
5. Insert gift card. Glue the combined bear pant suit piece to the coordinating shape on the card front.
6. Fold the top of the card base down and tuck under the buckle of the belt. Glue the combined hat brim and the scarf into place.
7. Use a piece of foam adhesive square to attach the button to the scarf and the nose to the combined mouth piece. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:)
8. Glue the combined holly to the hat brim. Use foam adhesive squares to attach the combined mouth/nose and glue the small round eyes to the card base.
9. Apply glue to the back center of the bear’s head and attach the large combined hat base. I used adhesive jewels to accentuate the eyes.
10. Ta Da!

Gingerbread Man Flip Gift Card

Gingerbread Man Flip Gift Card- JMRush 

Approximate Card size: H 5.25” X W 4.25”

This design has a gift card pocket under the Gingerbread man’s head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design files here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the round gingerbread man head with holes to the coordinating base. Glue the small oval nose piece to the coordinating shaped nose piece; aligning at the top center. Glue the candy swirl designs to the round solid candy bases.
3. Apply glue to the side tabs on the card base.
4. Attach the side tabs to the middle section. Allow to dry. Glue the round curvy piece to the combined head.
5. Insert the gift card. Glue the two hand and two foot curvy pieces to the card base.
6. Use a piece of foam adhesive square to attach the combined nose to the combined face. Use foam adhesive squares to attach the combined candy pieces to the front of the card base.
7. Use foam adhesive squares to attach the combined head to the top panel of the card base. I used enamel adhesive jewels to accentuate the eyes:)

Gnome Flip Beard Gift Card

Gnome Flip Beard Gift Card- JMRush 

Approximate Card size: H 6.25” X W 4.25”

This design has a gift card pocket under the Gnome’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest Gnome suit piece to the middle layer of the card base. Glue the small Gnome suit piece to the black Gnome bottom piece; aligning at the bottom center and edges. Glue the holly berries to the holly base. Apply glue to the side tabs on the card base.
3. Attach the side tabs to the middle section. Allow to dry. Glue the square buckle into place. Glue the hat detail to the hat base.
4. Insert gift card. Glue the combined Gnome suit piece to the coordinating shape on the card front.
5. I curled the edges of the combined holly and used enamel adhesive jewels to accentuate the holly. ( Hint- I didn’t have any small red jewels, so I used a sharpie to color the jewels before attaching them:) Use a piece of foam adhesive square to attach the combined holly to the hat.
6. Find placement of the hat. Use foam adhesive squares to attach the nose and mustache. Apply glue to the top of the card base and attach the combined hat:)
7. Ta Da!

Winter Fox Gift Tag Ornament

Winter Fox Gift Tag Ornament-JMR

Approximate size: H 5” X W 3.75”

This design can be used as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock.

2. Glue the head piece with eye cut outs to the coordinating solid head piece. Glue the head/scarf piece to the coordinating shape on the two legged fox silhouette. Flip the tag base over and glue the coordinating (white) label full fox body to it; centering it.

3. Flip the tag base back over and attach the combined two leg fox silhouette to the base using foam adhesive squares. Glue the small face to the combined fox head. Glue the nose to the combined fox head.

4. Use foam adhesive squares to attach the combined fox head

to the coordinating shape on the fox base. Loop a ribbon through the circular hole at the top and tie. I used adhesive enamel dots to accentuate the eyes:)

Arctic Fox Gift Tag Ornament

Arctic Fox Gift Tag Ornament-JMR

Approximate Card size: W 3.75” X H 5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. (I used double sided card stock)

2. Glue the face piece with eye holes to the solid coordinating shape. Glue the the muzzle piece with a cut out mouth to it’s solid base piece. Glue the scarf/head piece to the coordinating shape on the two legged fox silhouette.

3.Loop a ribbon through the hanger circle at the top. Your file will have the hole in a slightly different location… I didn’t like the way it originally was hanging;)

4. Use foam adhesive squares to attach the combined muzzle to the combined head piece. Use a foam adhesive square to attach the nose to the combined head. Use a foam adhesive square to attach the combined two legged fox to the coordinating shape on the tag base. 

5. Use a foam adhesive square to attach the combined head piece to the combined fox tag. I used adhesive enamel dots to accentuate the eyes:)

Santa Suspenders Gift Card Holder

Santa Suspenders Gift Card Holder- JMRush 

Approximate Card size: H 5.25” X W 4.5”

This is a double sided design that has a gift card pocket on the backside.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

(Coming Soon )You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Glue the large black piece to the card base. Glue the small beige face to the santa head piece; centering at the eyes.
3. Glue the combined santa head to the coordinating shape on the combined card base. Glue the gold buckle into place. Glue the red belly and bottom (w buttons) to the combined card base.
4. Glue the mustache and red hat to the coordinating shape on the combined card base. Glue the hands into place and use a small piece of foam adhesive square to attach the nose. Glue the two small black suspenders into place. ( I have the hat puff ball attached in this image…which I changed to the top of the hat)
5. Flip the combined cad base over. Fold the card base at the score lines. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
6. Glue the buttons and other set of hands to the backside 
7. Insert gift card.
8. Tuck the top section into the pants.
9. Use small pieces of foam adhesive squares to attach the hat’s puff ball to the top. ( there is a scalloped puff ball or a circle puff ball… which ever your prefer:) I used small adhesive dots to accentuate the eyes:)

Stacked Cardinal Bird Card

Stacked Cardinal Bird Card- JMRush 

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

1. Cut design pieces.

2. Fold the card base. Glue the two claws to the smaller (red) bird silhouette. Glue the bird face (with eye cut out) to the solid bird face with a beak. Glue the pinecone with cut outs to their solid coordinating shape bases.

3. Glue the smaller wing piece (red) to the larger ling wing piece (black). Glue the combined bird silhouette to the larger bird silhouette (black). glue the small (oval with scalloped edge) to the small wing shape.

4. Glue the bird face to the combined bird silhouette. Use a foam adhesive square to attach the small combined wing to the long combined wing.

5. Glue the combined wing to the combined bird silhouette.

6. Curve the pinecones and leaves as you like.

7. Align the tree branch so that it’s edges line up with the edges of the card. Center the leaf shapes (green) underneath the branch as shown. Carefully glue the branch to the leaves without losing their position and not glueing it to the card yet.

8. Place the combined bird silhouette so that it’s claws wrap around the tree branch and apply glue to the backside of the bird body, branch, and center part of the leaves. Use a foam adhesive square on the backside of the bird’s head.

9. Attach the combined bird and combined leaf/branch to the front of the card; making sure that the edges of the branch align with the edges of the card. I used a piece of foam adhesive square to attach the full combined pinecone and glue to attach the half pinecone:)