Crab Valentine Handled Box

Crab Valentine Handled Box-JMRush

W 5" X  H 4” X D 1.25” (Not including handle)

This cute Crab Box can be filled with your treats to give to your sweetheart. This design is compatible with 8x12 or 12X12 mats.

1.Cut design pieces.

2. Flip the box base face ( pretty side) down. Pre-Fold all score lines.

3.Apply glue to the tabs on the second section. Secure to the third section from the top.

4. Apply glue to the tabs of the third section. Secure to the first section, creating a box.

5. Apply glue to the wings of section four.

6. Secure to the inside of the wings of section five.

7. This is what it should look like:)

8. Glue the scalloped edge piece to the box base- matching it up to the coordinating shape on the box base.

9. Insert the handle into the slots on either side of the box.

10. Using foam adhesive squares, attach the 3 hearts together, layer by layer.

11. Glue the full crab body to the the crab body base. Glue the smaller crab arms/head to it’s base.

12. Using foam adhesive squares, attach the small crab arm/head combined pieces to the combined full crab body.

13. Using foam adhesive squares, attach the heart to the center of the handle and the crab to the front of the box.

14. I used ribbon and a enamel dot to finish the box

15 Ta Da:)

In Your Arms Tri-panel Card-JMRush

Approximate size: W 5.25 x H 4.25”

The In Your Arms Card features front cover word art that states “In your arms is my happy place” and is bordered by

heart side panels. The card opens to a blank back page ( like a regular card ) and fits in a regular envelope. This design is compatible with both 8X12 and 12X12 mats. 

1.Cut design pieces.

2.Fold the side panels in toward the center of the card base. Fold the top rectangle behind.

3. Glue the word art base (rectangular panel) to the center panel of the card base.

4. Center the word art to the word art base and glue in place. 

5. Center and glue the heart side panels to the front of it’s coordinating heart panel on the card base. Repeat for the other side.

6.This is what your card will look like. Finish by placing adhesive jewels to the corners of the side panels and in the center of the heart. Attach a ribbon to the center of the main panel:)

Heart Hot Air Balloon Card

Heart Hot Air Balloon Card-JMRush

Card size: W 4.25" X 5.5” This design is compatible with both 8X12 and 12X12 mats and the hot air balloon can be used separately.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2. Fold the card at the score lines. Glue the two small balloon baskets together. Glue the large circle balloon shape to the balloon base.
3. Using foam adhesive squares, attach the large heart to the card base. Glue the small hearts on either side of the large heart and glue the large balloon basket to the top of the combined basket pieces.
4. Glue the combined basket piece into place.
5. Using foam adhesive squares, attach the balloon to the folded card base. Finish with a ribbon and a enamel adhesive dot:)

3D Heart Flower Box

3D Heart Flower Box-JMRush

Finished Box size (approximately): 4” x 4” x 1.5”

This heart flower box is designed to hold small treats or small gifts. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut the design pieces.
2. Fold all score lines. Turn the box base over (pretty side down)
3. Apply glue to the center panel of the top box section.
4. Attach the top of the bottom box section centering it and secure into place.
5. Apply glue to the top side tabs and secure them to the box panels below them.
6. Apply glue to the bottom side tabs and secure them to the box panel above them.
7. You should have a box shape:)
8. Apply glue to the bottom creased edge on one of the smaller heart shapes. I used hot glue which is messy…but dries quicker and helps if you have a short attention span;) Center it on top of one of the larger heart shapes and secure into place.
9. This is what your heart should look like.
10. Repeat for all of the heart pairs. Apply glue to the bottom creased edge of one of your combined heart shapes. 
11. Match it up to the heart flower base and secure it into place. Repeat for all of the heart shapes on both of the flower bases.
12. This is what it should look like. I used a enamel adhesive dot for the center of each flower.
13. Apply glue to the backside of one of the flower bases, careful no to glue the bottom tab. The tabs need to remain separate.
14. Center and secure the backside of the other flower base creating a two sided flower.
15. Slide the tab of the combined flower section into the top slot on the box top.
16. Separate the tab on the inside of the box and apply glue to the top of each tab. 
17. Secure the tabs to the inside top of the box.
18. Finish with a ribbon:)