High Top Shoe Thank You

High Top Shoe Thank You-JMRush

Approximate Card size: W 4.25” X H 5.5” - Fits A2 envelopes

This design has eyelet holes to interlace a ribbon, features the cut out words “Thank You”, and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock).
2. Fold the card base (with only circular holes) and the shoe tongue (with lettering cut outs) along the score lines.
3. Apply glue to the backside of the shoe tongue piece on the side with the cut out lettering.
4. Center and secure to the inside of the shoe card base.
5. Glue the backside of the tongue/shoe toe piece and secure it to the topside of the shoe tongue aligning it at the bottom to the card base.
6. Glue the eyelets to the top of the combined shoe centering it and aligning around the eyelet holes.
7. I used approximately 26” of 1/4” ribbon and  looped the ribbon through the bottom eyelet of the combined shoe. Pull the ribbon so that the ends are even each side.
8. Thread one side of the ribbon through each eyelet crossing back and forth.
9. Repeat with the other side of the ribbon threading the opposite way as before. Tie your ribbon:)

High Top Shoe Centerpiece

High Top Shoe Centerpiece-JMRush

Approximate Centerpiece size: W 10.50” X H 6.25”

This design has eyelet holes to interlace a ribbon, features a fold out stand, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

See also:  High Top Shoe Invitation

http://jmrushdesigns.blogspot.com/2016/09/high-top-shoe-invitation.html

1. Cut design pieces. ( I used double sided card stock).
2. Fold the kick stand out of the large base shoe (with only circular holes).
3. Apply glue to the backside of the large shoe piece with the star cut out. ( Be careful not to apply glue to the area that will touch the kick stand on the base shoe)
4. Center and secure to the base shoe; aligning the eyelet holes.
5. Make sure the kick stand is not glued down and is still operational. 
6. Glue the smallest shoe piece to the top of the combined shoe; centering it and aligning the eyelet holes.
7. I used approximately 36” of 1/8” ribbon and  looped the ribbon through the bottom eyelet of the combined shoe. Pull the ribbon so that the ends are even each side.
8. Thread one side of the ribbon through each eyelet.
9. Repeat with the other side of the ribbon threading the opposite way as before (under or over the top of the card) Tie your ribbon:)

High Top Shoe Invitation

High Top Shoe Invitation-JMRush

Approximate Card size: W 5.50” X H 3.25”
Fits and A2 envelope

This design has eyelet holes to interlace a ribbon, comes with an optional print and cut insert to help organize your party details, and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock). Print and cut the optional Invitation insert pieces.
2. Flip the card base over ( pretty side down). Glue the optional Print and cut invitation inserts to the coordinating shapes on the card base. 
3. Glue the eyelets ( circles), single larger circle design, toe, and bottom runner pieces to the front of the high top piece. Fold the card base along the score line.
4. Glue the combined high top piece to the front of the card. 
5. Using approximately 21” of 1/8” ribbon (or smaller) loop the ribbon through the bottom eyelet of the combined card. Pull the ribbon so that the ends are even each side.
6. Thread one side of the ribbon through each eyelet.
7. Repeat with the other side of the ribbon threading the opposite way as before ( under or over the top of the card)
8. Tie your ribbon and fill out your party information on the inside of the card:) 

American Flag Open Top Box

American Flag Open Top Box-JMRush

Approximate size: W 6.75” X D 2.75” X H 4.25”

This open top box file has a american flag design that wraps around the entire box. This box can be used as a gift box, a centerpiece, or as a napkin holder for your Fourth of July/ Memorial day parties ( fits napkins 6.5” in width). This design is compatible with both 8X12 and 12X12 mats.

1. Cut design pieces.
2. Fold score lines on the box base. Apply glue to the backside of the side tab on the largest box base section and secure to the smaller box base section- ( make sure that the large section has a square at the top and the smaller section has a square at the bottom:)
3. Apply glue to the right corner of the backside of the top center tab. Secure to the long rectangular tab to the right forming a 90 degree angle.
4. Apply glue to the left corner of the backside of the bottom center tab. Secure to the long rectangular tab to the left forming a 90 degree angle.
5. Apply glue to the outside of the 90 degree angle pieces and secure the square flap to the right.
6. This is what it should look like:)
7. Repeat for the other side so that your open top box shape is complete.
8. This is what it should look like:)
9. Apply glue to the front of the box. Apply the long rectangle stripes- alternating colors.
10. Apply glue to the side panel. Apply the smaller rectangle stripes-alternating colors.
11. Repeat for the other two sides. Glue the rectangular (blue) shape to the upper left corner ( on the front and on the back).
12. I used foam adhesive squares to attach the stars together- layering from largest to the smallest on top. I staggered the stars in this photo.
13. The stars are centered in this picture.
14. Finish by adding a ribbon or twine:)

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222