Hanging Tea Light Lantern

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com

Reindeer Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6347

Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6181

Gnome Hanging Tea Light Lantern

Scroll down for more construction instructions

Wreath Hanging Tea Light Lantern

Snowflake Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.6694

Snowman Hanging Tea Light Lantern

Cricut grouping measurement: W 11.4111

Star David Tea Light Lantern
Cricut grouping measurement: W 9.8722

Nativity Hanging Tea Light Lantern 
Cricut grouping measurement: W 11.5556

Pinecone Hanging Tea Light Lantern

Cricut grouping measurement: W 11.5514

Poinsettia Hanging Tea Light Lantern
Cricut grouping measurement: W 11.4111

Santa Belt Hanging Tea Light Lantern
Cricut grouping measurement: W 11.6444

Star Hanging Tea Light Lantern
Cricut grouping measurement: W 11.3833

Christmas Tree Hanging Tea Light Lantern

Cricut grouping measurement: W 11.6639

Hanging Tea Light Lantern (Flameless)-JMRush

Lantern size: W 2.5 x D 2.5 x H 5”
Cricut grouping measurement: W 11.6181

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. 

 You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1.Cut design pieces. ( I used double sided card stock and vellum paper) This tutorial is being used for multiple design files. Yours may vary from tutorial images.

2. Fold all score lines. 

3. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.

4. Glue the vellum paper to the window panels; centering around each of the cut out sections.

5. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box.

6. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle.

7. This is what it should look like:)

8.-10. Repeat for the rest of the top tabs until fully enclosed.

11. Image of the last two tabs being secured.

12. Apply glue to the inside of one of the circular hanger pieces. Align with the other circular hanger piece and secure.

13. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides. 

14. Repeat for the two top tabs creating a shallow box.

15. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)

16.  Tuck the end tab into the slot creating a circular tube shape.

17. Secure until dry.

18. Place the narrow circular ring piece and square piece over the tube shape you just created.

19. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.

20. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

21. This is what it should look like:)

22. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 

lantern tea light base. Place inside the lantern square base and secure.

23. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. I finished this lantern with a ribbon:)

Bottom Image:)

Gnome Hanging Tea Light Lantern

1. Follow the above directions for the lantern base. (You will only have one set of the gnome decor in this file.) 

2. Using pieces of foam adhesive squares, attach the mustache to the top of the window; centering it ( make sure you chose the side that the circle hanger faces). Glue the belt buckle to the center of the lantern base. Curl the holly as you like.

3. Glue the nose to the mustache. Glue the red holly to the holly leaves.

4.  Using pieces of foam adhesive squares, attach the brim of the hat just above the nose/mustache.

5. Using enamel jewels, decorate the holly. I finished with a small pom pom glued to the top just under the circular hanger:)

Santa Belt file additions:)

Poinsettia Lantern (Flameless)

Poinsettia Lantern (Flameless)-JMRush

Approximate Lantern size: W 3 x D 3 x H 7” (H 7.75” with Hanger)

This Flameless lantern features a 3D poinsettia flower. A transparent frosted effect is created when vellum paper is used. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces. ( I used double sided card stock and vellum paper) ( There is a small flower center shape that is optional in this file. I used an enamel dot in the center of the flower instead)

2. Match up the petal outline shapes with the coordinating vellum shapes. (You may need to rotate the matched sets to get them to align as they are irregular shapes. Glue the coordinating vellum pieces to the backside of the outline flowers. (I did not glue the inside vein designs of the petals).

3.-4.Glue the circular shaped hangers together. (Make sure the stems of this piece remain separate)

5. -6.Apply glue to the backside of the 3 open rectangle mats and the one rectangular mat with a flower shape. Center and secure to the front of each window on the two lantern body pieces. Place the flower rectangular mat on the first lantern body window ( Do not apply glue to the backside of the flower or petals)

7. Flip the two combined lantern body pieces over ( pretty side down and as shown). Glue the edges of the rectangular vellum piece, center, and secure to each open window.

8. Fold the score lines on the two lantern bodies and the lantern square base.

9. Glue one of the stems of the circular hanger combined piece to the inside of the top of the second panel. (The other stem will be glued inside the lantern later)

10. Center the two lantern body pieces. Apply glue to the backside of the right side tab on the left lantern body piece. Attach to the other lantern piece making sure that the bottoms align (joining the two body pieces). 

11. -12-13. Apply glue to the side long tab on the right side of the right lantern body piece. Secure the long side tab to the other side creating a box.

14. Apply glue to the top tab with the circle hanger and secure it to the triangular panel to it’s left side.

15. Image of the top tab secured to the triangular panel.

16.-17. Repeat for the next tab.

18. Apply glue to the remaining unsecured circular hanger stem. Secure it to the opposite side of the lantern top.

19. Continue securing the top tabs until the top is fully enclosed. ( I applied glue to the last two top tabs at the same time and secured them)

20. Curve your combined flowers and leaves as you like. Glue the centers of the two larger combined flower petal pieces together; staggering the flower petals. Glue the centers of the three smaller combined flower petals together. Largest on bottom and smallest on top and alternating the petals. This is what it should look like. I used enamel adhesive dots to decorate the center of the combined flower piece.

21. Apply glue to the inside ring (front side) of the leaves. 

22. Secure the bottom of the combined flower to the inside ring of the leaves. 

23. Use a foam adhesive square to attach the combined flower/leaf piece  to the coordinating shape on the combined lantern body. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.

24. Repeat for the bottom two tabs creating a shallow box.

25. Place a flameless candle inside and the lantern top in it’s base.

26. I finished with a ribbon on the circular hanger at the top of the lantern:)

Poinsettia Tea Light (Flameless)

Poinsettia Tea Light (Flameless)-JMRush

Approximate Dimensions: W 8” x D 7” X H 2”

This design is compatible with both 8X12 and 12X12 mats and when vellum paper is used, an opaque lantern effect is created. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. (I used double sided card stock and vellum paper)
2. Match up the petal outline shapes with the coordinating vellum shapes. (You may need to rotate the matched sets to get them to align as they are irregular shapes)
3. Glue the coordinating vellum pieces to the backside of the outline flowers. (I did not glue the inside vein designs of the petals).
4. Repeat for all of the flower combinations.
5. Fold the tabs of the tea light base ( long narrow strip with tabs) and curve the flower petals as you like. Fold the score lines in the leaf piece.
6. Tuck the end tab into the slot creating a circular tube shape. I applied a small dab of glue on the tab to hold in place.
7. Image of the tab in the slot.
8. Place the narrow circular ring pieces over the tube shape you just created.
9. Apply glue to the outside of one of the rows of tabs and secure to the narrow ring. Repeat for the other set of tabs and circular ring.
10. Image of the tabs secured.
11. Apply glue to the tops of the ring and tabs. 
12. Secure the thicker circular ring to the top.
13. Image of this step completed.
14. Place a flameless votive candle inside the tube. Apply glue to the tops of the ring and tabs. Secure the thicker circular ring to the top.
15. Apply glue to the center ring on the backside of the leaf piece. Center and secure to the tea light base.
16. Fold the tabs of the combined flower petal pieces. One set folds up and the other down. Apply glue to the tabs that are folded up.
17. Place the other large combined flower petal piece to this piece and align the tabs together. ( petals will be staggered) Secure each of the tabs together. This will create a space in between the flower sections.
18. Glue the centers of the three smaller combined flower petals together. Largest on bottom and smallest on top and alternating the petals.
19. This is what it should look like. I used enamel adhesive dots to decorate the center flower piece.
20. Glue the set of three combined flower petals to the set of two larger combined flower petals; alternating the petals. Apply glue to the bottom center of the combined flower piece and attach to the tea light base piece. ( I used hot glue for this)
21. Push down the center of the combined flower piece so that the tea light flame is showing.
22. Glue the flower center in the center of your creation:)

Poinsettia 3D 4x6 Photo Frame

Poinsettia 3D 4x6 Photo Frame - JMRush 

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8”

This easy to construct, two piece frame can be used vertically or horizontally and features a fold out stand and a decorative poinsettia. This design is compatible with both 8X12 and 12X12 mats. Poinsettia flower and leaves can also be used separately.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out design piece.

2. Insert the tabs of the frame base into the frame base slots.

3. 4. Align and center the pieces. On the backside. Apply glue to the inside of the tabs and secure into place.

5. Pre-fold all scored lines on the edges of the frame folding them inward toward the center. Fold all score lines on the flower pieces. For each set of the flowers- fold one in and one out.

6. Line up the points of the Largest flower set. Make sure you have one flower fold down and one up. Glue the center to secure it together.

7. Apply glue to the flower edges.

8. Secure the point pieces together working your way around the flower until all points are glued together. Repeat for the other two flower sets.

9. Attach a foam adhesive square to the center of the two largest flowers.

10. Attache the flower sections together staggering the points. Largest on bottom ascending to the smallest. Shape the petals of the flower as you like.

11. I used 4 small adhesive jewels in the center of the poinsettia . Curve the leaves as you like.

12.  Starting on the top edge of the frame base, apply hot glue to the very edge. 

13.  Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.

14. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.

15.-21. Repeat this steps for each of the frame sides. Be careful to only apply glue to the edge of each side so that the stand leg on the base of the frame will have mobility later and so  inserting your photo is easy:)

22. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.

23. Repeat for each tab.

24.Insert your photo by sliding it into place. The sides of the frame will lift up a bit to ease the photo insertion.

25. Use foam adhesive squares to attach the poinsettia and leaves onto your 3D frame:)

Poinsettia 3D Gift Tag

Poinsettia 3D Gift Tag-JMRush

This design can be used as a gift tag or ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines. ( There are three sets of two for the flower - fold one in and one out in each matching set).

3.Apply glue to the front of the solid smaller square design piece. Glue it to the back of your Gift Tag base. (This piece is included in case you use double sided paper and need a plain surface to write on:)

4. Line up the points of the flower. Make sure you have one flower fold down and one up. Glue the center to secure it together.

5.-8. Apply glue to the flower edges and make sure the points of the flower stay aligned. Rotate the flower repeating this step until all the points are secured.

9. Repeat for the two sets of smaller flowers. Curve the leaves as you like .

10. Apply foam adhesive squares to the center of the two largest groupings of flowers.

11. Center the three flowers staggering the petals and secure into place. Curve the flower petals as you like. Glue the flower onto the gift tag base.( I used another foam adhesive square to give more dimension). 

12. Finish with a ribbon and adhesive jewels in the center of your flower:)

Poinsettia Gift Card Box

Poinsettia Gift Card Box-JMRush

Box size: W 3.5 x D 2.5 x H .75”

This gift box has a hinged top lid and is sized to fit most gift cards. The poinsettia flower can also be used separately. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold box score lines. 

3.Apply glue to the outside of the top tabs.

4. Secure to the top panel. Apply glue to the next set of tabs.

5. Secure to the rectangular shape just above the tabs. Apply glue to the last set of tabs.

6. Secure to the last rectangular panel. Your box will be complete now. Fold flower score lines. Fold one in and one out on each size. Fold leaves in half.
7. Line up the points of the flower on the largest set of two. Make sure you have one flower fold down and one up. Glue the center to secure it together.

8. Apply glue to the flower edges and secure.
9. Repeat for the two smaller sets of flower petals.
10. Curve the petals and Leaves as you like after it dries.

11. Glue the leaves on the top of the box.
12. Glue the flower sets on the box staggering the layers. I used foam adhesive squares in between each layer to give the flower more dimension.
13. I used four small adhesive gems in the center of the flower it give a bit of sparkle:)
14. Your Poinsettia Gift Card box is complete.

Merry Christmas Poinsettia Card

Merry Christmas Poinsettia Card-JMRush

Card size: 5.5” x 4.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines. For each set of the flowers- fold one in and one out.

3.- 4. Apply glue to bottom of the rectangular border piece and center on the top of your card. Center the lettering on the lettering base and glue into place.

5. Line up the points of the Largest flower set. Make sure you have one flower fold down and one up. Glue the center to secure it together.

6. Apply glue to the flower edges and curve the petals as you like after it dries.

7. Repeat for the other two flower sets.

8. Attach the centers of the flowers together. I used small pieces of foam adhesive squares to give it more dimension. Curve the flower petals and leaves as you like.

9.Glue the leaves onto your card and then your flower. I again used foam adhesive square pieces to secure the flower onto the card base. Glue your lettering into place and finish with adhesive jewels in the center of your flower:) Your card is complete!