Turkey Wobble Wings

Turkey Wobble Wings Box-JMRush

Finished Box Dimensions including handle (approximate): 

W 3” x H 4.5” x D 2.5”

This cute little turkey has arms that “wobble” when moved. Fill this cute little turkey box with your favorite goodies to give as a gift. This design is compatible with 8x12 or 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

Turkey Slider Hatch Treat Box

Turkey Slider Hatch Treat Box-JMRush

Finished Box Dimensions (approximate)- W 2” x H 4” x D 7/8”

This cute little Turkey treat box has a hatch opening and will hold 3-4 “mini” candies. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-Fold all score lines.
3. Apply glue to the tabs on each side.
4. Secure the tabs to the inside of the lower box tabs creating a half box.
5. Apply glue to the outside of each side of the half box.
6. Secure to the inside of the side panel on each side.
7. Place the pointed tabs on the upper section through the slot of the inside wing piece. You will need to bend the pointed tabs to get them into place. (Do not fold them) Make sure that the tab is on the outside of the wing piece. Repeat on the other side.
8. Glue the upper section’s wings to the box base ( careful not to glue the tabs. They must remain free for the hatch to open properly.)

9. This is what you box should look like.

10. Apply a dab of glue to the upper edges of the wing section on each side -again being careful not to glue the tabs.

11. It should look like this:)

12. Glue the hind feathers together.

13. Glue the teat drop shaped gobbler onto the face backing then glue the beak and eyes into place.

14. Glue the head feathers into place then the completed face.  The feet are glued to the bottom of the box and the hind feathers to the back.

15. Slightly curve the side wings and glue them into place on the side of the box.

16. Ta Da! Your Turkey is complete:)

Turkey Cone Container

Turkey Cone Container-JMRush

Basket size: W 4" X  H 2.25”

Turkey Size (approximate): W 6” X H 5.5”

This Turkey Cone Treat container can be filled with goodies for a gift or used as a center piece for your Thanksgiving feast. 20” of 1/4” ( or smaller width) ribbon or twine is needed to complete the basket. This design is compatible with 8x12 or 12X12 mats.

1. Cut the design pieces.
2. Pre-fold all score lines.
3. Using 20” of 1/4” or smaller ribbon or twine, lace it through the holes of the Octagonal design piece to create a basket. Tie a bow to secure.
4. Apply glue to the Turkey toes.
5. Secure the Turkey toes to the bottom of the basket.
6. Place the tab inside the slot of the curved body piece.
7. Apply glue to the inside of the tab.
8. Secure the glued tab to the inside of the curved body piece.
9. Continue this step for all curved body pieces.
10. Glue the single hind feather and the larger double hind feather together.
11. Glue the smaller double hind feather on top of the section.
12. Glue the gobbler tear drop to the backdrop of the face section
13. Glue the beak into place on the face section.
14. Glue the white of the eyes into place.
15. Assemble the head feathers by glueing the center and the two side feathers together.
16. Apply glue to the inside of the Largest scalloped curved body section.
17. Secure it to the the Large bottom straight cone lining up the seems on the back side.
18. Repeat for the next scalloped body piece securing it on top of step 17.
19. Make sure your seams are aligned:)
20. Repeat for the next scalloped body piece securing it on top of step 18.
21. Make sure your seams are aligned:)
22. Roll the triangular top piece into a cone shape.
23. Test fit that the edges will align.
24. Apply glue to the scored edge.
25. Secure the cone together.
26. Apply glue to the inside of the top piece.
27. Secure it to the top of the body section making sure that the seams align.
28. Glue the hind feathers onto the back seemed side of the turkey body.
29. Glue the face and head feathers into place.
30. Apply a dab of glue to the top of each wing and secure onto the body.
31. You can curve the wings if you like.
32. TA DA! Your Turkey is Complete and ready to be filled with goodies or sit and look pretty;)

Look what an awesome job Dianne Jenkins did with this herd of Turkeys:) Adorable! Thanks for the project pictures Dianne. Love it!:)