Fireplace Box

Fireplace Box-JMRush

Approximate size: W 4.25 X D 1.50 X H 3.75”

This box features a cut out and when vellum paper and a flameless votive candle is used, it creates a glowing fireplace effect. This design can be used for small gifts, a treat box, or as a flameless candle votive.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Glue the firewood to the inside of the fireplace box.

3. Glue the small vellum square in place on top of the firewood and centering it in the fireplace opening.

4.Fold all score lines.

5. Apply glue to the bottom side tabs.

6. Attach to the side flaps of the fireplace box creating a open box shape. Apply glue to the tabs facing you.

7.Center the large square back panel and secure into place.

8. Fold the score line in the brick patterned piece. Apply glue to the backside of this piece.

9. Center the brick piece with the front of the fireplace and secure into place.

10. The tabs of the brick piece are glued to the back of the box.

11. Using adhesive squares, attach the stocking trim to the stockings and place the squares in the middle of the backside of the fireplace mantel.

12. Center the mantel piece and attach to the top of the fireplace box. Glue the sides of the mantel piece to the box. Glue the stocking into place.

13. Finish with ribbon and place a flameless votive candle in the box to create a glowing fireplace effect. This box can also be used for small gifts or as a treat box:)

Santa Chimney Treat Box

Santa Chimney Treat Box-JMRush

Box size: W 2.25 x D 2 x H 3”

This treat box has a hinged top lid and can be filled with your favorite goodies. This design is compatible with both 8X12 and 12X12 mats.

You can purchase this design here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines.

3.Apply glue to the bottom of the bottom tab. Secure to the bottom square panel.

4. Apply glue to the next set of tabs tabs and attach to the bottom square panel.

5.Repeat for the last tab.

6. Apply glue to the side tab and place inside. Your box should be complete after this step.

7. Center the full square piece on the top of the box, aligning the slot. Glue into place.

8. Center the open square piece on top of the full square and glue into place. Glue the boots and pant trim piece onto each leg segment.

9. Apply glue to the backside of one of the leg segments and glue the backside of the other leg segment to it. Be careful not to get glue on the tabs of the leg segments.

10. Glue the brick pattern piece onto the box and then glue the chimney top on top of it. 

11.Slide the tabs of the leg segments into the slot on the top of the box.

12. Separate the tabs on the inside of the box lid. Apply glue to the underneath side of each tab and glue onto the inside of the lid.

21. I finished the santa chimney box by adding a ribbon around the chimney:)