Daffodil Fence Card

Daffodil Fence Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. Design elements can be used independently.

1. Cut design pieces.

2. Glue the fence to the cover of the card base. Glue the full flower petal shape to the flower base. 

3. Using pieces of foam adhesive squares, attach the small circular flower shape to the center of the combined flower pieces.

4. Use foam adhesive squares to secure the backs of the petal sections of the combined flowers to the front of the card base. Glue the stem/leaf section of each flower to the card base.

5. Using foam adhesive squares, attach the grass to the front of the card.

6. Fold the score line on the card base and finish with adhesive jewels in the center of each flower.Ta Da:)

Tulip Fence Card

Tulip Fence Card-JMRush

Approximate Card size: W 5.50” X H 4.25”

This design is compatible with both 8X12 and 12X12 mats. Design elements can be used independently.

1. Cut design pieces.

2.Glue the full flower petal shape to the flower base. Glue the smaller sunshine to the top of the larger sunshine.

3. Using pieces of foam adhesive squares, attach the single flower petals to the center of the combined flower pieces. Using a foam adhesive square, attach the small circle shape to the top of the sunshine.

4. Glue the fence to the cover side of your card base. Use foam adhesive squares to secure the backs of the petal sections of the combined flowers to the front of the card base. Glue the stem/leaf section of each flower to the card base.

5. Using foam adhesive squares, attach the grass to the front of the card.

6. Fold the score line on the card base. Ta Da:)

Bunny Box

Bunny Box-JMRush

Approximate Box size: W 2.25 x D 2.25 x H 2.25”- with Bunny size: H 5.25”

This cute Bunny box utilizes it’s ears as handles and is perfect for treats or small gifts. The Bunny can be used independently from the treat box. This design is compatible with both 8X12 and 12X12 mats. 

1. Cut the design pieces. (I used double sided card stock.)
2. Fold all score lines. Glue the Bunny face with eye holes to the bunny face solid base.
3. Apply glue to the the bottom tabs shown. Secure those tabs to the top of the square that they surround, forming an open box shape.
4. Apply glue to the other bottom tab. Secure to the inside of the bottom of the box.
5. Apply glue to the side tab and secure, creating a box.
6. Use foam adhesive squares to attach the combined bunny face to the double bunny face piece.
7. Glue the inner ears, nose, cheeks, and hair bow to the combined piece.
8. Use foam adhesive squares to attach the combined bunny piece to the box. This is what it should look like.
9. Attach the fluffy tail with a foam adhesive square. I finished the bunny with a ribbon and adhesive enamel dots for the eyes:)

Bounce Bunny Hug Treat Box

Bounce Bunny Hug Treat Box-JMRush 

Approximate box size: W 3” x D 2.25 x H .75” (H 4.5” including Bunny head)

This treat box features character arms that open to a small treat box. This design is perfect for Easter or birthday parties. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided cardstock for the card base). 

2. Fold the box base along score lines. It is not necessary to fold the score lines closest to the tip of each paw. Apply glue to the two top tabs and secure them to the top (head) panel.

3. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.

4. Apply glue to the bottom of the bottom section of the narrow strip. Attach to the back of the box. 

5.Glue the Bunny face to the solid Bunny face base.

6.Glue the inner ears into the corresponding shapes on the combined face piece. Using foam adhesive squares, attach the combined face piece to front of the box centering it with the bunny head shape on the box base.

7.-9. The paws tuck into the slots on the narrow strip in the center. Attach a foam adhesive square in the center of this strip and secure the heart into place. Using foam adhesive squares, attach the the tail on the back. Fill with goodies:)

Cross Lantern with Lily (Flameless)

Cross Lantern with Lily (Flameless)-JMRush

Lantern size: W 3 x D 3 x H 7”

This Flameless Cross Lantern features cut outs and when vellum paper is used, a layered frosted glass effect is created. The Lily flower can be used independently.  This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces. (I used double sided card stock)

2. Glue the vellum paper to the back sides of the window panels.

3. Fold all score lines. 

4.Apply glue to bottom side of the long side tab of the lantern window base and secure to the other lantern window base piece.

5. Flip the joined lantern windows over so the front is facing you again. This is what it should look like. Apply glue to the backsides of the  individual Cross panels. Secure them to the outside of the lantern centering them with each lantern window.

6. Glue the circular hangers together. ( Make sure the stems of this piece remain separate)

7. Flip the joined later windows over ( The long side tab should be on your right).  Glue one of the stems of the Circular hanger to the inside of the top of the third cross panel.

8. Apply glue to the top tab and to the side long tab on the very left side.

9. Secure the Long side tab to the other side creating a box.

10. Begin to secure the top tabs to the inside of the next angled triangle. 

11. -12. Glue the other Circular hanger stem to the inside of the opposite side of the lantern. Finish securing all of the top tabs. 

13. Apply glue to the top tabs of the Lantern square base and secure to the inside of the sides.

14. Repeat for the bottom tabs creating a shallow box.

15. Glue the matching flower petals together. You may have to turn the petals to get them to match up. ( bottoms together so you have pretty on each side.)

16. Glue the Flower stamen pieces together ( bottoms together so you have pretty on each side.)

17.-18. Place the flower petal section with a smaller center underneath the flower petal section with a circular shape. Center and tuck the top layer of petals under the bottom petals to join the flower sections.

19. Curve the Flower stamen combined piece so that all of the oval sections are on top. Curve the flower petals as you like.

20. Curve the leaves. Glue the stamen section to the center of the combined flower petals.

21. Place a flameless candle inside the lantern base and place the lantern top inside the base. Glue the leaves and lily into place. Finish with ribbon and enamel opal adhesive dots in the center of each cross.

Dinosaur Card

Dinosaur Card-JMRush

Approximate Card size: H 5.50” X W 4.25”

This design is compatible with both 8X12 and 12X12 mats. 

1. Cut design pieces.

2. Fold the score line on the card base. Glue the Dinosaur head piece with cutouts to the Dino head with teeth.

3. Glue the combined Dino head to the solid Dino head base.

4. Use foam adhesive squares to secure the Dino combined head to the front of the card base. I finished with enamel dots to accent the eyes:)

Bounce Bunny Box

Bounce Bunny Box-JMRush

Box size: W 2.25 x D 2 x H 3”- Bunny size: W 5” x H 7.5”

This cute Bounce Bunny box is perfect for treats or small gifts. The Bunny can be used independently from the treat box. This design is compatible with both 8X12 and 12X12 mats. 

1. Cut the design pieces. ( I changed the color of the box at the end of the tutorial:)
2. Flip the card base over- Face down. Fold all score lines.
3. Apply glue to the the bottom tabs shown.
4. Secure those tabs to the top of the square that they surround, forming an open box shape.
5. Apply glue to the side tab and other bottom tab. Secure the bottom tab to the square as before and secure the side tab creating a box.
6. Glue the Bunny body to the Bunny solid base.
7. Glue the inner ears to the combined piece within the coordinating shapes. Apply foam adhesive squares to the backside of the bunny head and regular glue to the tips of the backside of the ears. Secure to the combined piece. Use foam adhesive squares to attach the feet.
8. This is what it should look like.
9. Glue the box to the backside of your bunny with the slot of the box facing outward. Attach the fluffy tail with a foam adhesive square. I finished the bunny with a ribbon:)