Snowman Treat Box

Snowman Treat Box-JMRush

Box size: W 2.25 x D 2 x H 3”

This treat box has a hinged top lid and can be filled with your favorite goodies. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

http://digiplayground.com/Jennifer-Rush/

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1.Cut design pieces.

2. Fold all score lines.

3.Apply glue to the bottom of the bottom tab. Secure to the bottom square panel.

4. Apply glue to the bottom of the next two tabs on the other side of the bottom square panel.

5. Secure to the square panel and apply glue to the side tab, forming your box.

6. The Lid tab will fit into the slot to close your box.

7. Place the tab of the hat piece into it’s slot, forming a circle. 

8. Apply glue to the inside to hold it in place.

9. Slide the circular hat brim over the hat piece.

10. Glue the tabs on the bottom of the hat piece to the bottom of the hat brim piece.

11.Secure in place and let dry.

12. Apply glue to the top tabs.

13. Center the full circle on top of the joined hat pieces and glue into place.

14.Apply glue to the top of your box.

15. Attach the hat to the top of your box. Glue the eyes nose and mouth into place. 

16.Glue buttons into place.

17-18I used a length of 12.5” ribbon as the snowman’s scarf glueing it around the snowman box.

19. Apply glue to the top of the bottom of the snowman arms.

20. Attach to the upper back corner on each side.

21. I finished the snowman by adding a ribbon around his hat.Your snowman is complete:)

Ornament Gift Card Box

Ornament Gift Card Box-JMRush

Box size: W 3.5 x D 2.5 x H .75”

This gift box has a hinged top lid and is sized to fit most gift cards. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces.

2. Fold all score lines. 

3.Apply glue to the outside of the top tabs. 

4. Secure to the top panel. Apply glue to the next set of tabs.

5. Secure to the rectangular shape just above the tabs. Apply glue to the last set of tabs.

6. Secure to the last rectangular panel. Your box will be complete now. Apply glue to the backside of one of your folded circular ornaments.

7. Align another one of the circular shapes to it and secure. Apply glue to the backside of that piece.

8. Align the third circular shape and secure. Apply glue to the backside of that piece and repeat for the final circular shape.

9. Glue a 2" piece of ribbon to the top center of your box and the glue the backside of your joined circular ornament pieces on top.

10. Finish by glueing a ribbon to the top of the ornament:)

Christmas Tree Gift Card Box

Christmas Tree Gift Card Box-JMRush

Box size: W 3.5 x D 2.5 x H .75”

This gift box has a hinged top lid and is sized to fit most gift cards. This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces.

2. Fold all score lines. 

3.Apply glue to the outside of the top tabs.

4. Secure to the top panel. Apply glue to the next set of tabs.

5. Secure to the rectangular shape just above the tabs. Apply glue to the last set of tabs.

6. Secure to the last rectangular panel. Your box will be complete now. Apply glue to one bottom side of your Christmas trees.

7.Match up another Christmas tree and secure.

8.Apply glue to the bottom side of the joined Christmas trees.

9. Match up another Christmas tree and secure. Apply glue to the bottom side again.

10. Match up the last Christmas tree and secure.

11. Glue the tree trunk to the cover of the gift card box and glue the joined Christmas trees into place. 

12. I topped the tree with a adhesive jewel:)

Santa Ho Ho Tri-Fold Gift Card

Santa Ho Ho Tri-Fold Gift Card Holder-JMRush

Card size: 5” x 3”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the SVG and Cricut file here:

 https://www.jamieandjenn.com

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut out all design pieces.
2. Fold all score lines.
3. Apply glue to the edges of the inside of the top and apply the top panel.
4. Apply glue to the very outside edges of the gift card section. ( If your glue gets too far inward, your gift card section will not work properly).
5. Secure the gift card section to the base and the large rectangular piece in place.
6. Glue the buttons on the top of the gift card section and Glue the lettering onto the lettering base.
7. Apply glue to the rectangular buckle and position it on the triangular point of the top of the card base.
8. I used foam adhesive squares to attach the optional “Ho Ho” words to the front.
9. Ta Da! Your card is done:)

You might also like these trifold cards:)

You can purchase them here:

https://www.silhouettedesignstore.com/artists/485222

Let it Snow Card

Let it Snow Card-JMRush

Card size: 5.5” x 4.25”

This card features a cut out on the card base and when vellum paper is used, a layered transparent effect is created.This design is compatible with both 8X12 and 12X12 mats.

1.Cut design pieces.

2. Fold the Card along score lines.

3.Apply glue to the top center of the circular snowflake design.

4. Secure the circular vellum piece to the top. Apply glue to the outer edge of the joined circular piece.

5. Attach this piece to the inside of your card base - centering it to the circular cut out.

6. Apply a small glue dot to the center of the vellum piece on the front.

7. Secure the second largest snowflake and apply another dot of glue to the center.

8. Secure the smallest snowflake on top. I used a small adhesive dot to decorate the center.

9. Apply glue to the backside of the snowflake trim piece. Make sure that you only apply glue to the surface that will touch the card base. (There is a small area that is designed to hang over the edge)

10. Align the snowflake trim to the edge of the front cover.

11.Glue the thin rectangular runner on top of the trim - lining it up to the edge of the card base. Glue the same sized lettering bases together, offsetting them a bit.

12. Center the lettering to the top layer of the lettering base and glue it together.

13. I used foam adhesive squares to secure the lettering to the front of the card.

14. Glue the large rectangular piece on the inside of the back flap of your card if needed. ( I include these incase you use double sided paper so you will have a spot to write in your card:) Your card is complete!

Make a Wish Card

Make a Wish Card-JMRush

Card size: 5.5” x 4.25”

This card features a cut out on the card base and when vellum paper is used, a layered transparent effect is created.This design is compatible with both 8X12 and 12X12 mats.  

1.Cut design pieces.

2. Fold the Card along score lines.

3.Apply glue to the top center of the circular flower design.

4. Secure the circular vellum piece to the top. Apply glue to the outer edge of the joined circular piece.

5. Attach this piece to the inside of your card base - centering it to the circular cut out.

6. Glue the scalloped vellum piece to the inside edge of the front cover of the card.

7. Glue the thin runner rectangular piece on top of the scalloped vellum piece matching it up to the edge of the card base.

8.Glue the large rectangular piece on the inside of the back flap of your card if needed. ( I include these incase you use double sided paper so you will have a spot to write in your card:)

9.Center the lettering to the lettering base and glue together. Glue the center of the two remaining flower designs together.

10. Glue the joined flowers to the center of the vellum. I angled them so that it fit in-between the design in the back.

11. I used foam adhesive squares to attach the lettering on to the card front and a small shiny dot to decorate the center of the flower:)

12. Ta Da:) Your card is complete!

Christmas Light Bulbs Card

Christmas Light Bulbs Card-JMRush

Card size: 5” x 3”

This design is compatible with both 8X12 and 12X12 mats.

1. Cut out all design pieces.
2. Fold all score lines.
3. Apply glue to the edges of the inside of the cut outs on the top..making sure that your glue does not show through the front.
4. Secure the top panel that has a cut outs. 
5. Apply glue to the bottom inside gift card section. Secure the bottom panel that has cut outs on.
6. Apply glue to the top section.
7. Secure the full top panel to the base and apply glue to the bottom section.
8. Secure the full bottom section on and apply glue to the very outside edges of the gift card section. ( If your glue gets too far inward, your gift card section will not work properly).
9. Secure to the card base.
10. Glue the light bulb screw ends on each light bulb. This file contains two different designs for this part. There are solid ends if you prefer to use those:)
11. Repeat on the front. Finish with a ribbon.
12. Ta Da! Your card is done:)