Sketch Toy Picture Frame

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"

1. Cut out all design pieces.
2. Pre-fold all scored lines on the outside of the frame folding them inward toward the center. (See 4 X 6 Frame picture tutorial above for more detailed pictures:)
3. Starting on the bottom edge ( the edge under the stand up leg score lines) apply hot glue to the edge. Be careful to only apply it to the edge so that the stand leg on the base of the frame will have mobility later:)
4. Place the glued edge down so the it is in alignment with the bottom score line. This will form a box.
5. Roll the box inward toward the center of the frame. This action will apply the glue edge to the base of the frame. Hold until the glue is secure.
6. Repeat this steps for each of the frame sides.
7. Fold in the score lines on each side of each tab. Apply a dab of hot glue. Fold the tab into the tab hole and hold until the glue is secure.
8. Repeat for each tab.
9. Insert your picture.
10. Place the Sketch frame on top of the base frame and glue into place.
11. Glue the knobs together and using foam adhesive squares adhere them into place on the frame. Happy Crafting:)

Finished Frame Dimensions: W 7 1/8"X H 5 1/4" X D 5/8"
This design requires a 12X12 mat.