Layered Snowman

Layered Snowman-JMR

This design is compatible with the 8x12 and 12x12 mats. Perfect for shirts, totes, wood signs, wall art, vinyl, and more!

 You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Valentines BirdHouse Treat Box

 Valentines BirdHouse Treat Box-JMR

Approximate size: W 3 x D 1.75 x H 3.5”

Approximate box size: W 3 x D 1.75 x H 2”

This cute bird house treat box opens from the handles on the top. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. ( I used double sided card stock)

2. Flip the birdhouse box over and fold the bird house base at the score lines.

3. Connect the two wing tabs on the bottom.

4. Apply glue to the bottom of the connected wing tabs and fold in the small bottom tab. Hold until secure.

5. Apply glue to the bottom of the birdhouse box and secure the last large square bottom panel; aligning at the edges.

6. Apply glue to the side tab and connect the side panel.

7. Curve the flowers and leaves as you like.

8. Combine the two large petal groups by glueing the middle circle; Larger on bottom and alternating petals. Repeat for the two smaller petals. Glue the smallest circle to the larger one; centering it.

9. Glue the two petal groups together; alternating petals. Glue the leaves to the bottom of the combined flower. Attach a piece of foam adhesive to the bottom.

Attach the combined circles with a piece of foam adhesive square as shown.

10. Attach the combined flower as shown. Push in the two top handle panels.

11. Apply small pieces of foam adhesive square to the backsides of the two triangular roof top pieces and attach to front and backside of the birdhouse box.

12. Finish with a ribbon and I used an adhesive jewel for the center of the flower:)

 

Nativity Scene Gift Tag Ornament

Nativity Scene Gift Tag Ornament-JMR

Approximate size: H 3.5” X W 2.5”

This Nativity Scene design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the black nativity scene to the blue nativity scene shape. (Optional) Flip the gold glitter ornament base over and center the white rectangle shape and attach with glue. This space is for writing a gift message.
3. Using a ribbon, loop through each of the two circular hangers to create a ribbon hanger:)

Wagon Wheel Gift Tag Ornament

Wagon Wheel Gift Tag Ornament-JMR

Approximate size: H 3.75” X W 3.25”

This wagon wheel design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver hollow circle shape to the coordinating spoked brown silhouette with a circular hanger. Glue the smallest silver hollow circle to the small brown hollow circle; centering it.
3. Glue the brown hollow circular shape to the combined ornament shape.
4. (Optional) Flip the combined ornament over and attach the white circle with glue. This hollow circle is for writing a gift message.
5. Flip the combined ornament over and attach a ribbon and twine for a hanging loop:)

Cowboy Hat Gift Tag Ornament

Cowboy Hat Gift Tag Ornament-JMR

Approximate size: H 2.5” X W 4”

This Cowboy Hat design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the hat shape with cut outs to the brown hat base.
3. Glue the smaller hat shape to the coordinating shape on the combined hat.
4. Glue the smallest hat shape to the combined hat.
5. Glue the thin long brim piece to the coordinating shape on the combined hat. Glue the small red hat band into place on the combined hat.
6. (Optional) Flip the combined ornament over and center the white hat shape and attach with glue. This shape is for writing a gift message.
7. Flip the combined ornament over and attach a piece of twine for hanging:)

Windmill Gift Tag Ornament

Windmill Gift Tag Ornament-JMR

Approximate size: H 5” X W 2.5”

This Windmill design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. (Optional) Flip the combined ornament over and center the white windmill and attach with glue. This shape is for writing a gift message.
3. Return the ornament to the front. Glue the brown “x” design frame work shape to the coordinating shape on the combined base.
4. Attach the silver windmill to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)

Cow Head Gift Tag Ornament

Cow Head Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This CowHead design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

 

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver cow head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black cow head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon to finish:)

Bull Head Gift Tag Ornament

Bull Head Gift Tag Ornament-JMR

Approximate size: H 4.25” X W 4.25”

This Bull Head design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver bull head ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. Attach the black bull head to the combined ornament base with foam adhesive squares.
4. (Optional) Flip the combined ornament over and center the white circle and attach with glue. This circle is for writing a gift message. 
5. Return the ornament to the front. Attach a ribbon and a jingle bell to finish:)

 

Sheriff Star Gift Tag Ornament

Sheriff Star Gift Tag Ornament-JMR

Approximate size: H 4.5” X W 4.25”

This Sheriff Star design doubles as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut the design pieces. I used double sided card stock.
2. Glue the silver barb wire ornament shape with a circle cut out hole to the coordinating solid brown silhouette with a circular hanger.
3. (Optional) Flip the combined ornament over and center the white star and attach with glue. This star is for writing a gift message. 
4. Return the ornament to the front. Fold the star shape at the score lines making sure that the center of each of the star triangles is a peak. Attach the 3D star to the combined ornament base with foam adhesive squares.
5. Attach a ribbon and a button to finish:)