Girl Bunny Glasses Bunny Egg Basket

Girl and Boy Bunny Glasses Egg Basket-JMR

Approximate size: W 5.5.” X D 7” X H 6.5”

This basket egg holder holds six eggs and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here: https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock. (There are two solid black paws and an extra solid white bunny head included that are not shown in this beginning tutorial photo)
2. Glue the bunny head with eyes and mouth cutouts to the solid black bunny head; centering it. Fold the score lines in the basket base.
3. Apply glue to the top side tabs and secure to the top panel. Glue the last bunny head (ear, eye, mouth, and nose cutouts) to the combined bunny head.
4. Repeat for the bottom tabs/panel forming an open box.
5. Insert the handle into the side slots.
6. Flip the egg carrier piece over ( pretty side down). Fold the score lines on the egg carrier box.
7. Glue the corners and secure.
8. Apply glue to the long tabs and secure the top rectangular shape.

9.   This is what it should look like.

10. Flip the egg carrier over and place it inside the basket base. 

11. Glue the two dome shaped pieces to either side of the combined basket;

      aligning at the sides at the bottom. 

12. Assemble the bunny paws glueing the layers. black on bottom, pink middle,

      and white with cutouts on top. 

13. This is what they should look like:) 

14. Use foam adhesive squares to attach the combined paws and the bunny tail

       to the backside of the combined basket. 

15. Use foam adhesive squares to attach the front paws to the front of the

       combined basket. 

16. Glue the solid white bunny head to the backside of the combined bunny

       head.

17. This is what it will look like (but without the bow)

18. Use foam adhesive squares to attach the combined bunny head to the front of the combined

      basket. 

19. Attach the glasses using pieces of foam adhesive squares or by glueing. Curve the bow/bowtie

      pieces. ( The boy bunny file will only have two pieces.) 

20. Glue the backside of the bow with side tabs. 

21. Girl bunny only: Glue the small bow to the larger bow. 

22. Wrap and glue the small rectangular bow piece in the center of the bow. 

23. Image of the back of the girl bow. 

24. I used enamel adhesive jewels to accentuate the eyes ( and glasses on the girl). Use a foam

      adhesive square to attach the bow:)

Lamb Peek Pocket Card

 Lamb Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Flip the card base over and fold at score lines. Use foam adhesive squares to attach the hair with cut outs to the coordinating shape. Glue the eyes to the lamb face (with eye cutouts) and glue the hooves to the oval feet; aligning at the bottom.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket. Use foam adhesive squares to attach the combined hair to the lamb face.
4. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape. Use foam adhesive squares to attach the combined feet to the lamb base and the nose to the combined lamb face.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the lamb base to the coordinating shape on the front of the card.
7. Attach the combined lamb head to the lamb base using either foam adhesive squares or a wobble mechanism ( as shown:)

Marshmallow Bunny Egg Basket

(Marshmallow) Bunny and Chick Egg Basket-JMRush

Approximate size: W 6.” X D 4.25” X H 4.5” Including handle

This basket egg holder holds six eggs and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock. There are two sets of bunnies included in this file incase you want to have the basket double sided. I only used one set in the product image. I also used green card stock for the egg holder portion of the basket:) The Bunnies also have arms that are not shown in this tutorial.
2. Glue the medium bunnies (eyes and nose cut outs) to the larger (black) bunny solid pieces. Fold the basket base. 
3. Apply glue to the top side tabs and secure to the top fence panel. Glue the last bunny pieces (ear,eye,and nose cutouts) to the combined bunnies.
4. Repeat for the bottom tabs/panel forming an open box.
5. Insert the handle into the side slots.
6. Flip the egg carrier piece over ( pretty side down). Fold the score lines on the egg carrier box.
7. Glue the corners and secure.
8. Apply glue to the long tabs and secure the top rectangular shape.
9. This is what it should look like.
10. Flip the egg carrier over and place it inside the basket base.
11. Glue two of the combined bunnies to the long side of the combined basket.
12. Attach the third bunny with a foam adhesive square.
13. Glue the long grass piece to the long side of the combined basket aligning at the bottom:)
14. Repeat for all sides of the basket.
15. I switched colors of the egg holder portion of the basket to green. Finish with a ribbon:)

Picket Fence Egg Holder

Picket Fence Egg Holder -JMRush

Approximate Card size: W 6.25” X D 4.50” X H 4.75” Including handle

This basket Easter egg holder holds six eggs and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the holder base. Apply glue to the top side tabs and secure to the top rectangular panel.
3. Apply glue to the top side tabs and secure to the top rectangular panel.
4. Repeat for the bottom tabs/panel forming an open box.
5. Insert the handle into the side slots.
6. Flip the egg carrier piece over ( pretty side down). Fold the score lines on the egg carrier box.
7. Glue the corners and secure.
8. Apply glue to the long tabs and secure the top rectangular shape.
9. This is what it should look like.
10. Flip the egg carrier over and place it inside the holder base.
11. Glue the fences (4) to the coordinating size sides aligning at the bottom.
12. Curve the grass as you like and glue to the coordinating size sides aligning at the bottom:)

Chick Peek Pocket Card

 Chick Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. This design can also be used as a wobble card. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the backside of the fringed grass. Attach to the solid rectangular shape.
3. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
4. Image of pocket section.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the chick shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes to the circular chick head shape and attach the beak with a foam adhesive square.
8. Using foam adhesive squares or a wobble mechanism to attach the combined chick head shape to the coordinating shape on the front of the card:)

Bunny Peek Pocket Card

Bunny Peek Pocket Card -JMRush

Approximate Card size: W 5.50” X H 4.25”

This easy to construct design has an inside pocket that can be used for notes or gift cards and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Apply glue to the side tabs and fold up toward the card base; creating a pocket.
3. Apply glue to the backside of the fringed grass. 
4. Attach to the solid rectangular shape.
5. Glue the combined grass rectangle to the coordinating shape on the lower section of the card base.
6. Glue the rabbit shape to the coordinating shape on the upper portion of the car base; aligning at the bottom edge.
7. Glue the eyes, nose, and insides of the ears to the coordinating shapes of the rabbit shape on the front of the combined card base.
8. Using foam adhesive squares, attach the double circle muzzle shape to the coordinating shape on the combined rabbit :)