Cupid Basket

Cupid Basket-JMR

Approximate Box size: H 2.50” X W 3” X D 2.50”

Approximate Design size: H 5.50” X W 5” including handle - W. 8.5 including arrow

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock) 

2. Glue the skin colored Face with facial detail to the other face (with eyeholes). Glue the black colored Face with eye detail to the solid white face shape. Glue the smaller feet to the larger feet bases; aligning on the bottom and pinky toe side of each foot.  Glue the smaller hands to the larger hand bases; aligning on the top. Glue the larger diaper to the coordinating shape on the box base.

3. Fold the arrow feather pieces (2) at the score lines. Apply glue to one side of one feather and attach one side of the other feather to it. Attach to the coordinating shape on the brown arrow base.

4. Fold the box base at the score lines. Glue the combined skin colored faces to the combined black/white face. Glue the red heart to it’s coordinating shape on the arrow base.

5. Glue the hair, eyebrows, and eyeballs to the combined face.

6. Apply glue to the top two tabs on the box base and secure to the shape above. Curve the eyelashes and glue into place ( optional )

7. Apply glue to the bottom two tabs on the box base and secure to the round diaper shape below forming a complete box.

8. Glue the smaller diaper piece to the back outside of the box base; aligning at the top center.

9. Use a foam adhesive square to attach the combined feet to the back of the box base.

10. Insert the handle into the side slots on the box.  Repeat for the other side. 

11. Glue the center of the combined arrow to the front of the basket as shown. Use a foam adhesive square to attach the face to the front of the box base.

12. Use a foam adhesive square to attach the combined hands to the front of the box base. Finish with a ribbon:)

Valentines Bus Card

Valentines Bus Card-JMR

Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1.Cut design pieces. I used double sided card stock.

2. Glue the smaller bus to the larger one. Fold the card base.

3. Glue the floral bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the three hearts; smallest on top:)

4. Glue the four solid circles ( two red and two white) to the inside of the open circles; centering them.

5. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the combined hearts to the center of the combined bus.

6. Use pieces of foam adhesive squares to attach the bottom silver bumper piece and side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. 

7. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it:)