2018 Mint Box

2018 Mint Box- JMRush 

Approximate size: W 1.75” X D 5/8” X H 3”

This file is designed to hold a standard Tic Tac™ container and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the backside of the bottom tab and the lower two side tabs. Secure the panels to the left to the tabs.
3. Apply glue to the backside of the long side tab on the right and secure it underneath the top panel.
4. Insert standard size Tic Tac™ box. This tutorial shows a mini Tic Tac™ box.
5. Insert the top flap into the slot on the box base.
6. Flip the box base over. Apply glue to the backside of the 2018 piece and center on the box side without the flap/slot.
7. I finished by hot glueing a ribbon and a jingle bell to the top:)

Weekly Fun Facts and Photos

A new category for our new site. Insider information on Jamie and Jenn.... and some embarrassing pictures:) A new post added each week.

https://www.jamieandjenn.com

 Look for this icon on our page.

Santa Suspenders Gift Card Holder

Santa Suspenders Gift Card Holder- JMRush 

Approximate Card size: H 5.25” X W 4.5”

This is a double sided design that has a gift card pocket on the backside.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

(Coming Soon )You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Glue the large black piece to the card base. Glue the small beige face to the santa head piece; centering at the eyes.
3. Glue the combined santa head to the coordinating shape on the combined card base. Glue the gold buckle into place. Glue the red belly and bottom (w buttons) to the combined card base.
4. Glue the mustache and red hat to the coordinating shape on the combined card base. Glue the hands into place and use a small piece of foam adhesive square to attach the nose. Glue the two small black suspenders into place. ( I have the hat puff ball attached in this image…which I changed to the top of the hat)
5. Flip the combined cad base over. Fold the card base at the score lines. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
6. Glue the buttons and other set of hands to the backside 
7. Insert gift card.
8. Tuck the top section into the pants.
9. Use small pieces of foam adhesive squares to attach the hat’s puff ball to the top. ( there is a scalloped puff ball or a circle puff ball… which ever your prefer:) I used small adhesive dots to accentuate the eyes:)

Elf Tutu Card

Elf Tutu Card- JMRush 

Approximate Card size: H 5.5” X W 4.25”

This Design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Glue the larger tutu piece to the elf leg silhouette. Glue the elf shoes to the combined elf silhouette. Fold the tutu at the score lines. ( I changed the color of the tutu during this tutorial to red).
3. Glue the ends of the folded tutu to the combined ballerina silhouette making sure that the tops of the tutu are aligned with the hips of the combined elf silhouette. (The bottom of the tutu will hang over the bottom tutu of the combined elf silhouette.)
4. Glue the smaller tutu piece to the combined elf silhouette on top of the folded tutu. 
5. Glue the combined ballerina silhouette to the front of the card. I used enamel dots to accentuate the top of the combined tutu:)

Elf Flip Top Gift Card Holder

Elf Flip Top Gift Card Holder- JMRush 

Approximate Card size: H 5.75” X W 4.5”

This design has a gift card pocket under the Elf’s Head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest green elf suit piece to the middle layer of the card base. Glue the small green elf suit piece to the black elf bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the face piece to the face base.
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card. Glue the hair, teeth, and collar piece to the combined face piece. Glue the hat band and feather to the hat. Glue the combined elf suit piece to the coordinating shape on the card front.
5. Glue the combined elf face to the top front of the card base. Use small pieces of foam adhesive squares to attach the nose.
6. Flip the card base over and apply glue to the top section being careful not to apply glue to the gift card tab section. Glue the hat into place.
7. I used small adhesive dots to accentuate the eyes:)

Santa Flip Beard Gift Card Holder

Santa Flip Beard Gift Card Holder- JMRush 

Approximate Card size: H 4.75” X W 4.5”

This design has a gift card pocket under Santa’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest red santa suit piece to the middle layer of the card base. Glue the small red santa suit piece to the black santa bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the small face piece and mustache to the face base. ( There are small eye holes in the base to align the eyes).
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card.
5. Glue the combined santa suit piece to the coordinating shape on the card front.
6. Glue the combined Santa face to the top front of the card base; aligning at the small eye holes. Glue the hat into place.
7. Use small pieces of foam adhesive squares to attach the nose and puff ball. 
8. I used small adhesive dots to accentuate the eyes:)

Free File of the day:) 12-6-17

https://www.jamieandjenn.com/cards/jmr-monarch-tri-panel-card

Introducing JamieandJenn.com:)!

                                                   

My sister and I have teamed up for a new adventure and we would like to introduce you to JamieandJenn.com!  This is our new SVG store where you can purchase many of our Silhouette files in SVG format as well as our Commercial User Licenses. Our SVG files are compatible with many software and die cutting machines including the Cricut Explore. Please try some of our free SVG files to make sure our formats work with yours! 

AND...now through 12/31/17, use code J&JCHRISTMAS 

and save 25% off our Christmas categories!

Happy Shopping!

Final Hours Silhouette Sale

Final hours of the Silhouette design store sale. Don't miss it:)
50 percent off all designs online:) 
You can find mine here: https://www.silhouettedesignstore.com/artists/485222

Snowflake Gift Tag Ornament

Snowflake Gift Tag Ornament- JMRush 

Approximate size: H 3.75” X W 3.75”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.

2. Glue the snowflake to the Ornament base; centering it.

3. Flip the combined ornament over and glue the white gift tag piece on; centering it.

4. Finish with a ribbon:)

Silhouette Black Friday Sale 2017:)

Don't miss the Silhouette Design Store Black Friday sale! 50 percent off all designs online:) You can also purchase SVG files now. You can find mine here: https://www.silhouettedesignstore.com/artists/485222

Don't miss the Silhouette Design Store Black Friday sale! 50 percent off all designs online:) You can also purchase SVG files now. You can find mine here: https://www.silhouettedesignstore.com/artists/485222

Snowflake Round Gift Tag Ornament

Snowflake Round Gift Tag Ornament- JMRush 

Approximate size: H 3.50” X W 3.25”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.

2. Attach the snowflake circle to the silver circle using pieces of square foam adhesive. Flip the ornament base over and glue the white gift tag piece on; centering it.

3. Flip the ornament base  back over and glue the combined snowflake on; centering it.

4. Finish with a ribbon:)

Dachshund Gift Tag Ornament

Dachshund Gift Tag Ornament- JMRush 

Approximate size: W 4.5” X H 3”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2.  Glue the dog silhouette without a mouth to the full dog silhouette (with hat) shape. Glue the smaller ear silhouette to the larger ear silhouette;centering it. Glue the sweater piece to the dog silhouette with a mouth. Glue the hat trim piece to the hat base piece. Attach the puff ball to the combined hat piece using a piece of foam adhesive.

3. Glue the collar piece to the combined sweater dog silhouette. Glue the combined ear to the combined sweater dog silhouette.

4. I used a small enamel dot to accentuate the eye on the combined full dog layer. Use foam adhesive squares to attach the combined sweater dog to the combined full dog silhouette. Glue the tip of the tail to the combined full dog silhouette. I used a small enamel dot to accentuate the nose.

5. Use a foam adhesive square to attach the combined hat to the combined dog. 

6. Flip the combined dog over and glue the white dog silhouette to the back ( When using as a gift tag:)

7. Loop a ribbon through the hanging circle and finish with a bow:)

Labrador Retriever Sweater Hat Card

Labrador Retriever Sweater Hat Card- JMRush 

Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. 
2. Fold the card base. Glue the dog silhouette with two and half legs to the coordinating solid dog silhouette shape. Glue the hat trim and puff ball to the hat. Glue the sweater to the other dog silhouette.
3. Glue the sweater combination dog silhouette to the larger dog silhouette. (I used foam adhesive squares on the torso of the sweater dog silhouette and glue on the head, legs, and tail.)
4. Use foam adhesive squares to attach the dog ear to the combined dog. Glue the collar on. Use a foam adhesive square to attach the combined hat to the combined dog.
5. Apply glue to the backside of the combined dog and a foam adhesive square to the back of the hat.
6. Center and attach to the front of the card:)

3D Star Wreath Card

3D Star Wreath Card- JMRush 

Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.

2. Fold card base. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.) Curve the wreath branches as you like.

3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue to the front of the card base. Use foam adhesive squares to attach the star to the star ornament base. 

4. Finish with a ribbon:)

3D Star Ornament Gift Tag

3D Star Ornament Gift Tag- JMRush 

Approximate size: W 4” X H 4.25”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock. ( This file comes with an additional flat star to be used on the backside when used as a gift tag:)

2. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.)

3. Use foam adhesive squares to attach the star to the star ornament base.  Repeat for the other star on the backside when used as an ornament replace with the flat star when used as a gift tag:)

4.-5. Finish with a ribbon:)

I Workout because Tacos

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

I Workout because Cocktails- JMRush

I Workout because Cocktails- JMRush 

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

Snowflake Tea Light

Snowflake Tea Light-Flameless JMRush 

Approximate size: W 3.25” X H 2.5” X D 3.25”

This file is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.

2.  Fold each snow flake at the score lines. Fold the tabs of the lantern base.

3.-4. Apply a dab of glue to the inside of the lantern base just under the slot. (This will help to secure the tab when it passes through.) Tuck the end tab into the slot creating a circular tube shape.

5. Place the narrow circular ring pieces over the tube shape you just created (pretty side down).

6. Apply glue to the outside of one of the rows of tabs and secure downward to the narrow ring.

7. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

8.-9.  Flip the lantern base over. Place tea light inside the ring. Repeat as before; Apply glue to the outside of the tabs and secure downward to the narrow ring. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top. Apply glue to one side of the back of one of the snowflakes.

10. Attach the backside of another snowflake and align all edges.

11. Repeat for the last snowflake.

12. It should look like this:)

13. Open the combined snowflake grouping so that the single layer snowflakes are facing you. Apply glue to the inner ring and attach over the flameless candle. ( I used hot glue for this step).

14. I used adhesive jewels at the center of each circle to give it sparkle:)