2018 Mint Box

2018 Mint Box- JMRush 

Approximate size: W 1.75” X D 5/8” X H 3”

This file is designed to hold a standard Tic Tac™ container and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the backside of the bottom tab and the lower two side tabs. Secure the panels to the left to the tabs.
3. Apply glue to the backside of the long side tab on the right and secure it underneath the top panel.
4. Insert standard size Tic Tac™ box. This tutorial shows a mini Tic Tac™ box.
5. Insert the top flap into the slot on the box base.
6. Flip the box base over. Apply glue to the backside of the 2018 piece and center on the box side without the flap/slot.
7. I finished by hot glueing a ribbon and a jingle bell to the top:)

Weekly Fun Facts and Photos

A new category for our new site. Insider information on Jamie and Jenn.... and some embarrassing pictures:) A new post added each week.

https://www.jamieandjenn.com

 Look for this icon on our page.

Santa Suspenders Gift Card Holder

Santa Suspenders Gift Card Holder- JMRush 

Approximate Card size: H 5.25” X W 4.5”

This is a double sided design that has a gift card pocket on the backside.This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

(Coming Soon )You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Glue the large black piece to the card base. Glue the small beige face to the santa head piece; centering at the eyes.
3. Glue the combined santa head to the coordinating shape on the combined card base. Glue the gold buckle into place. Glue the red belly and bottom (w buttons) to the combined card base.
4. Glue the mustache and red hat to the coordinating shape on the combined card base. Glue the hands into place and use a small piece of foam adhesive square to attach the nose. Glue the two small black suspenders into place. ( I have the hat puff ball attached in this image…which I changed to the top of the hat)
5. Flip the combined cad base over. Fold the card base at the score lines. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
6. Glue the buttons and other set of hands to the backside 
7. Insert gift card.
8. Tuck the top section into the pants.
9. Use small pieces of foam adhesive squares to attach the hat’s puff ball to the top. ( there is a scalloped puff ball or a circle puff ball… which ever your prefer:) I used small adhesive dots to accentuate the eyes:)

Elf Tutu Card

Elf Tutu Card- JMRush 

Approximate Card size: H 5.5” X W 4.25”

This Design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock.
2. Fold the card base. Glue the larger tutu piece to the elf leg silhouette. Glue the elf shoes to the combined elf silhouette. Fold the tutu at the score lines. ( I changed the color of the tutu during this tutorial to red).
3. Glue the ends of the folded tutu to the combined ballerina silhouette making sure that the tops of the tutu are aligned with the hips of the combined elf silhouette. (The bottom of the tutu will hang over the bottom tutu of the combined elf silhouette.)
4. Glue the smaller tutu piece to the combined elf silhouette on top of the folded tutu. 
5. Glue the combined ballerina silhouette to the front of the card. I used enamel dots to accentuate the top of the combined tutu:)

Elf Flip Top Gift Card Holder

Elf Flip Top Gift Card Holder- JMRush 

Approximate Card size: H 5.75” X W 4.5”

This design has a gift card pocket under the Elf’s Head and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest green elf suit piece to the middle layer of the card base. Glue the small green elf suit piece to the black elf bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the face piece to the face base.
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card. Glue the hair, teeth, and collar piece to the combined face piece. Glue the hat band and feather to the hat. Glue the combined elf suit piece to the coordinating shape on the card front.
5. Glue the combined elf face to the top front of the card base. Use small pieces of foam adhesive squares to attach the nose.
6. Flip the card base over and apply glue to the top section being careful not to apply glue to the gift card tab section. Glue the hat into place.
7. I used small adhesive dots to accentuate the eyes:)

Santa Flip Beard Gift Card Holder

Santa Flip Beard Gift Card Holder- JMRush 

Approximate Card size: H 4.75” X W 4.5”

This design has a gift card pocket under Santa’s beard and is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut file here:https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Fold the card base at the score lines. Glue the largest red santa suit piece to the middle layer of the card base. Glue the small red santa suit piece to the black santa bottom piece; aligning at the bottom center and edges. Glue the square buckle into place. Glue the small face piece and mustache to the face base. ( There are small eye holes in the base to align the eyes).
3. Apply glue to the side tabs on the card base and attach to the middle section. Allow to dry.
4. Insert gift card.
5. Glue the combined santa suit piece to the coordinating shape on the card front.
6. Glue the combined Santa face to the top front of the card base; aligning at the small eye holes. Glue the hat into place.
7. Use small pieces of foam adhesive squares to attach the nose and puff ball. 
8. I used small adhesive dots to accentuate the eyes:)

Free File of the day:) 12-6-17

https://www.jamieandjenn.com/cards/jmr-monarch-tri-panel-card

Introducing JamieandJenn.com:)!

                                                   

My sister and I have teamed up for a new adventure and we would like to introduce you to JamieandJenn.com!  This is our new SVG store where you can purchase many of our Silhouette files in SVG format as well as our Commercial User Licenses. Our SVG files are compatible with many software and die cutting machines including the Cricut Explore. Please try some of our free SVG files to make sure our formats work with yours! 

AND...now through 12/31/17, use code J&JCHRISTMAS 

and save 25% off our Christmas categories!

Happy Shopping!